@Article{, title={Study of the Structural properties of Nickel Calcium Alumina Composites Prepared by Co-precipitation Method دراسة الخصائص التركيبية لمتراكبات ( ZnO-CaO-Al2O3 ) المحضرة بطريقة الترسيب الكيميائي المشترك}, author={Leqa’a Hamid Majid لقاء حامد مجيد and Mahdi Hatem Dewan مهدي حاتم ديوان}, journal={Journal of Education and Scientific Studies مجلة الدراسات التربوية والعلمية}, volume={4}, number={16}, pages={46-60}, year={2020}, abstract={Calcium alumina composites powders (CaAl12O19) and Zinc calcium alumina (ZnCaAl2O4) at different weight ratios (wt%) of nickel concentrations and interchange[[ ably with calcium and )]CaO)0.3 (Al2O3(0.7 ] ،(ZnO)x (CaO)0.3-x (Al2O3)0.7 ,where (X = 0, 0.5, 0.10, 0.15, 0.20, 0.25, 0.30), prepared using the Co-Precipitation method . The powders of the composites were prepared at calcined temperature of (700°C) and sintered at (1300°C) for (4h) to obtain the required phases. The structural properties of the prepared composites powders were characterized using) FEIR, FE-SEM, and EDX (techniques. (FTIR) spectroscopy technique of the prepared composites sintering at (1300°C) showed many absorption bands. absorption band at (777cm-1) showed formation of hexagonal structure of (CaAl12O19). while for calcium aluminate (CaAl12O19) doped with zinc oxide (ZnO) showed formation of the spinal phase (ZnAl2O4) at absorption band (667cm-1). (FE-SEM) scanning of (CaAl12O19) composite powder particles were in the form of (acicular) plate with average nanoparticle size (69.39nm). While the particles surfaces of the calcium aluminate composite doped with different weights ratio of zinc oxide (ZnO) where accumulated and compressed with irregular in shape and distribution on acicular calcium plate with average nanoparticle size was between (56.26-81.95)nm . (EDX) technique showed that the all elements percentage of the composites where homogenous and pure without any Impurities material.

تم )Zn/CaAl2O وزنك كالسيوم الومينا ) 4 ،)CaAl12O مساحيق متراكبات كالسيوم الومينا ) 19من تراكيز الزنك وفق طريقة الكسور المولية وبصفة تبادلية )%wt( تحضيرها عند نسب وزنية مختلفة])Al2O3)0.7[ [ (CaO)] ، (ZnO)x (CaO)0.3-x (Al2O3)0.7( مع الكالسيوم والمعرفة بالصيغ 0.3والمحضرة باستخدام طريقة الترسيب الكيميائي )X= 0 ,0.5 ,0.10 ,0.15 ,0.20 ,0.25 , حيث) 0.30700° ( وعوملت حرارياً عند C( المشترك. اذ تم كلسنة مساحيق المتراكبات المحضرة عند درجة حرارة4( للحصول على الاطوار المطلوبة . h( 1300° ( لمدة C( درجة الحرارة[ FTIR)،(FE-( الخواص التركيبية لمساحيق المتراكبات المحضرة، تم تشخيصها باستخدام تقنياتظهور مجموعة حزم امتصاص تعود للمتراكبات المحضرة عند )FTIR( من خلال تقنية ])SEM)،(EDX)CaAl12O19777 ( تشكّل الطور ) cm- 1300° (، اذ بيّنت حزمة الامتصاص ) 1 C( درجة حرارة التلبيدالمدعم بنسب وزنية مختلفة من )CaAl12O ذو التركيب البلوري السداسي. نتائج فحوصات المتراكب ) 19أوضحت ظهور حزم امتصاص متعددة تعود لأواصر مختلفة ، اذ بيّنت حزمة )ZnO( أوكسيد الزنكFE-( ذو التركيب البلوري المغزلي. نتائج تقنية )ZnAl2O 667 ( تشكّل الطور) 4 cm- الامتصاص ) 1كانت على شكل صفائح ابرية )CaAl12O لسطح جسيمات مسحوق متراكب كالسيوم الومينا ) 19 )SEM69.39 (. واما نتائج الفحص المجهري لجسيمات مسحوق nm( وبمعدل حجم حبيبي نانوي )acicular(كانت )ZnO( المدعم بنسب وزنية مختلفة من أوكسيد الزنك )CaAl12O متراكب كالسيوم الومينا ) 19بشكل حبيبات متراكمة ومضغوطة الواحدة فوق الأخرى وغير منتظمة الشكل متوزعة على سطحnm ( صفائح الكالسيوم الابرية الممتدة ، وكانت بأحجام حبيبية نانوية محصورة ضمن المدى– 56.26وجود جميع نسب العناصر في )EDX( 81.95 (. أظهرت تقنية مطيافية تشتت الطاقة بالأشعة السينيةالمتراكبات فضلاً عن بيان مدى نقاوة المواد وصفة التجانس لها، كذلك اكّدت عدم وجود أي عناصرثانوية في المتراكب .} }