@Article{, title={Enhancement of the corrosion resistance of copper metal by laser surface treatment تعزيز مقاومة التأكل لمعدن النحاس بواسطة المعالجة الليزرية السطحية}, author={Ahmed Qasim Abdullah احمد قاسم عبدالله and Lubna Abdul Razzaq لبنى عبد الرزاق مصلح}, journal={Iraqi Journal of Physics المجلة العراقية للفيزياء}, volume={18}, number={46}, pages={13-19}, year={2020}, abstract={In this work, the copper metal was treated using Nd:YAG laser with energy 1Joul to enhance corrosion resistance and improve surface properties. The copper metal has many applications in industry as well as water, oil and gas pipes. The same conditions, (laser power density, scan speed, distance between paths, medium gas-air) were applied in the laser surface treatment, After laser treatment, the samples microstructures were investigated using optical microscope (OM) to examine micro structural changes due to laser irradiation. Specimen surfaces were investigated using atomic force microscopy (AFM), X-ray diffraction (XRD), macro hardness, and corrosion test before and after laser treatment to examine the surface properties changes as a result of laser irradiation, and X-ray fluorescence (XRF). Results showed that laser irradiation enhances the corrosion resistance of the metal copper. Corrosion rates as low as 0.550 mpy for laser treated samples were obtained in comparison to 0.699 mpy obtained for the untreated samples. The corrosion protection afforded by laser treatment is attributed mainly to the grain refinement of the top surface layer. This layer is found to consist of nano-scale grains. Higher hardness and lower average roughness due to laser surface treatment.

في هذا العمل معدن النحاس تمت معالجته بليزر نديموم الياك بطاقة 1 جول, لتعزيز مقاومة التاكل وتحسين الخصائص السطحية. معدن النحاس له العديد من التطبيات الصناعية بالاضافة الى انابيب الماء والنفط والغاز. نفس الظروف (كثافة القدرة وسرعة المسح ومسافة المسار والوسط هواء) تمت بها عملية المعالجة السطحية بالليزر.بعد المعالجة بالليزر تم التحقق من التركيب المايكروي باستخدام المجهر الضوئيلمعرفة التركيب المايكروي كيف تغيرت نتيجة الليزرزسطح العينة تم فحصه باستخدام AFM XRD, والتصلد المايكروي والتأكل لمعدن النحاس قبل وبعد المعالجة الليزرية. النتائج بينت ان المعالجة الليزرية عززت مقاومة النحاس. معدل التأكل اقل من 0.550 mpy للعينات المعالجة باليزر بالمقارنة مع 0.699 mpy للعينات الغير معالجة. تعزى حماية من التآكل التي يوفرها العلاج بالليزر بشكل رئيسي إلى صقل الحبوب للطبقة السطحية العلوية. وجد ان هذه الطبقة تتكون من حبيبات بمقياس النانو. وبصلادة أعلى وانخفاض متوسط الخشونة بسبب المعالجة السطحية بالليزر.} }