TY - JOUR ID - TI - Removal of Tetracycline from Wastewater Using Circulating Fluidized Bed ازالة التتراسايكلين من المياه الملوثة باستخدام الابراج المتميعة الدوارة AU - Sabreen Lateef Kareem صابرين لطيف كريم AU - Ahmed A Mohammed احمد عبد محمد PY - 2020 VL - 21 IS - 3 SP - 29 EP - 37 JO - Iraqi Journal of Chemical and Petroleum Engineering المجلة العراقية للهندسة الكيمياوية وهندسة النفط SN - 19974884 26180707 AB - In this study, the circulating fluidized bed was used to remove the Tetracycline from wastewater utilizing a pistachio shell coated with ZnO nanoparticles. Several parameters including, Tetracycline solution flowrate, initial static bed height, Tetracycline initial concentration and airflow rate were systematically examined to show their effect on the breakthrough curve and the required time to reach the adsorption capacity and thus draw the fully saturated curve of the adsorbent. Results showed that using ZnO nanoparticles will increase the adsorbent surface area and pores and as a result the adsorption increased, also the required time for adsorbent saturation increased and thus the removal efficiency may be achieved at minimum antibiotic flowrate, maximum bed height, higher antibiotic concentration, and higher airflow rate. Also, a minimum fluidization velocity correlation was developed in this study. This correlation was found to be a function of liquid velocity, bed height, particle size, and particle density. The results showed that circulating fluidized bed has a better performance and last more than two hours before the bed biomass exhausted in comparison with traditional fluidized bed.

تم اعتماد برج الامتزازالمتيمع الدوار لازالة التتراسايكلين بنظام مستمرباستخدام قشور الفستق المطلية باوكسيد الزنك النانوي كمادة مازة ، وتم فحص تأثيرات عوامل عدة بما في ذلك: معدل تدفق التتراسايكلين ،عمق الحشوة ، وتركيز التتراسايكلين الاولي ومعدل تدفق الهواء على منحني الانكسار والوقت المطلوب للحشوة للوصول الى قابلية الامتزاز. اضافة اوكسيد الزنك يؤدي الى زيادة المساحة السطحية والفراغات في المادة المازة مما يؤدي الى زيادة الامتزاز وايضا الوقت اللازم المطلوب للوصول الى حد الاشباع ايضا يزداد كفاءة الازالة تتحقق عند اقل تدفق للتراسايكلين ،اعلى ارتفاع للحشوة، اعلى تركيز للتتراسايكلين واعلى حد لتدفق الهواء. ايضا تم ايجاد علاقة رياضية للحد الادنى من سرعة التميع ووجد انها دالة من سرعة السائل ،حجم حيبات المادة المازة ، عمق الحشوة وايضا كثافة الجسيمات . ايضا برج الامتزاز المتميع الدوار يحقق اداء افضل بزيادة الوقت اللازم للاشباع بحدود ساعتين مقارنة ببرج التميع التقليدي. ER -