TY - JOUR ID - TI - Estimation of Oil-Water Contact Level Using Different Approaches: A Case Study for an Iraqi Carbonate Reservoir AU - Abbas R. Abbas AU - Ali M. Saleem AU - Hayder Abdulzahra RH AU - Hussein Mohammed Kh AU - Dhiaa S. Ghanem AU - Wisam I. Al-Rubaye وسام عيسى الربيعي PY - 2020 VL - IS - 27 SP - E95 EP - E113 JO - Journal of Petroleum Research & Studies مجلة البحوث والدراسات النفطية SN - 22205381 27101096 AB - In petroleum industry, an accurate description and estimation of the Oil-Water Contact (OWC) is very important in quantifying the resources (i.e. original oil in place (OIIP)), and optimizing production techniques, rates and overall management of the reservoir. Thus, OWC accurate estimation is crucial step for optimum reservoir characterization and exploration. This paper presents a comparison of three different methods (i.e. open hole well logging, MDT test and capillary pressure drainage data) to determine the oil water contact of a carbonate reservoir (Main Mishrif) in an Iraqi oil field "BG”. A total of three wells from "BG" oil field were evaluated by using interactive petrophysics software "IP v3.6". The results show that using the well logging interpretations leads to predict OWC depth of -3881 mssl. However, it shows variance in the estimated depth (WELL X; -3939, WELL Y; -3844, WELL Z; -3860) mssl, which is considered as an acceptable variation range due to the fact that OWC height level in reality is not constant and its elevation is usually changed laterally due to the complicated heterogeneity nature of the reservoirs. Furthermore, the results indicate that the MDT test can predict a depth of OWC at -3889 mssl, while the capillary drainage data results in a OWC depth of -3879 mssl. The proper MDT data and SCAL data are necessary to reduce the uncertainty in the estimation process. Accordingly, the best approach for estimating OWC is the combination of MDT and capillary pressure due to the field data obtained are more reliable than open hole well logs with many measurement uncertainties due to the fact of frequent borehole conditions.

في الصناعة النفطية، تقدير او حساب خط تماس النفط والماء مهم جدا لتقدير الكميات المخزونة من النفوط وكذلك لاختيار الطرق المثلى لاستخراج هذه الكميات بأقصى معدلات انتاج ضمن الادارة المتكاملة للمكمن. لذلك يعتبر التعيين الدقيق لقيمة خط تماس النفط مع الماء هو خطوة ضرورية جدا للتمثيل والاستكشاف المكمني الامثل.في هذا البحث تم تقديم مقارنة لحساب خط تماس النفط والماء من ثلاث طرق حيث تم حسابه بواسطة مجسات التجويف المفتوح، معلومات الضغط الشعري بالإضافة الى معلومات فحص الضغط الطبقي لمكمن كاربوني (المشرف) في حقل نفطي عراقي (ج) حيث تم التعامل ودراسة ثلاثة ابار ضمن هذا الحقل واستخدم برنامج (Interactive Petrophysics IP) لتفسير مجسات التجويف المفتوح. بينت النتائج ان خط تماس النفـط والماء الذي تم حسابه عن طـريق تفسـير المجسـات لمـكمن المشرف الرئـيسي كان بـحدود (3881 م)، حيث كان هناك اختلاف عن العمق المقدر لكل بئر (بئر X- 3939م، بئر Y- 3844م، بئر Z- 3860م) علما ان هكذا فرق في حسابات العمق تعتبر مقبولة لان أساسا خط تماس النفط والماء لا يعتبر ثابت وارتفاعه يتغير تبعا لتعقيد وعدم تجانس المكمن .بالأضافة الى ذلك، وضحت النتائج ان حسابات مستوى تماس النفط مع الماء من بيانات الضغط الطبقي كان يقدر بحدود (3889 م)، بينما قيمة عمق تماس النفط مع الماء من حسابات الضغط الشعري كان بحدود (3879 م). الاستنتاج الاساسي يؤكد ان توفر البيانات الكافية لكل من الضغط الطبقي (MDT) وكذلك توفر أكثر بيانات حول تحليلات النماذج الخاصة (SCAL) سوف يقلل من نسبة الخطأ او عدم معلومية القيم وبالتالي دقة الدراسة. طبقا الى ذلك، ان أفضل طريقة لتحديد خط تماس النفط والماء في المكامن الكاربونية هي باستخدام بيانات كل من الضغط الطبقي وكذلك بيانات الضغط الشعري لكون البيانات تكون أكثر دقة من بيانات المجسات بالتجويف المفتوح لكونها تكون متأثرة بكثير من الظروف المتعلقة بتجويف الابار. ER -