@Article{, title={The effect of denture cleanser on the surface roughness of heat-cure acrylic denture base resin}, author={ليلى موســــــى and نهاد حسن محمد and صالح جوحي جاني}, journal={journal of kerbala university مجلة جامعة كربلاء}, volume={8}, number={1}, pages={56-62}, year={2010}, abstract={Back ground: The polymethyl methacrylate (PMMA) polymer is the most popular dental resin for denture base in dentistry since many years. Rough surface are likely to occur unavoidably during the construction of a dental appliance. An acrylic denture base may exhibit minor surface roughness which needs to be removed before the denture to be polished, this roughness if not removed it will effects the mechanical properties of denture base and render it more dental plaque and satin retainer eventually less hygienic. Aims of the study: In present study we examined the effect of denture cleanser on the surface roughness of heat-cure polymerized acrylic denture base resin.Material and method: (50) specimens of pink heat-cure acrylic resin were prepared with dimensions of (65 mm x10 mm x 3 mm) length, width and depth respectively according to ADA specifications 1975. The specimens were divided into (2) groups: control group consist of (25) specimens socked in distilled water and experimental group consist of (25) specimens socked in denture cleanser (protefix active ) about 15 minutes for (14) days.The surface roughness measured by (Talysurf 4). Results: The results showed a significant differences at (P < 0.05), as compared with control group. Conclusion: it can be concluded that the surface roughness of acrylic denture base increased with the frequent used of denture cleansers.

يعتبر الاكريلك الراتنجي من المواد الاكثر استخداما في صناعة الأسنان للعديد من السنين. وخشونة سطح الاكريلك من المحتمل أن تحدث حتما خلال بناء الأجهزة في صناعة اطقام الاسنان فقبل التلميع النهائي يجب ان تزال هذه الخشونة من السطح الاكريلكي لانها ان بقيت سوف تؤثر سلبا على الخصائص الميكانيكية والصحية لقاعدة الطقم الاكريليكي المعالج حراريا. درست (50) عينة من الاكريليك المتصلب حراريا مع الأبعاد (65 ملم 10x ملم × 3 ملم) الطول والعرض والعمق على التوالي وقسمت الى مجموعتان .مجموعة البحث تتكون (25 ) عينة غمرت بالمنظف الخاص بالطقم وهو(protefix active ) ولمدة ربع ساعة باليوم ولفترة اسبوعين. ومجموعةالسيطرة تتكون من (25) عينة غمرت بالماءالمقطر وبنفس الفترة.فحصت خشونة السطح باستخدام جهاز الأختبار(Talysurf 4) . وأظهرت النتائج ان الاكريلك المعالج حراريا والمنظف باستخدام (protefix active ) قد زاد من خشونة السطح (P < 0.05) اكثر من مجموعة السيطرة التي وضعت فقط بالماء المقطر. ويمكن الاستنتاج بان كثرة استخدام هذه المنظفات يؤثر سلبيا على خشونة السطح الاكريليكي لقاعدة طقم الاسنان.} }