@Article{, title={EFFECT OF ARTIFICIAL CAVITIES ON HEAT TRANSFER AND FLOW CHARACTERISTICS MICROCHANNEL دراسة تأثير الفجوات الافتراضية على خصائص الجريان وانتقال الحرارة في القناة المايكروية}, author={}, journal={Iraqi journal of mechanical and material engineering المجلة العراقية للهندسة الميكانيكية وهندسة المواد}, volume={20}, number={3}, pages={180-192}, year={2020}, abstract={An experimental investigation was conducted to study single-phase fluid flow and heat transfer in a copper micro channel. To investigate the effect of artificial cavities on fluid flow and single phase heat transfer in micro channel heat sink, two model of straight micro channel recognized as two models (model -1and model -2) were designed and manufactured ,where model-1 have smooth bottom surface while Model-2 have 47 artificial cavities distributed uniformly at the bottom surface along the micro channel length. The two models having the same nominal dimension of 300μm height and 300μm depth while the real dimension value are 367 μm for width and 296 μm for depth .De-ionized water was used as the working fluids. Experimental test was conducted at 30ᵒC inlet temperature with Reynolds numbers range from 700 to 2200 covering laminar flow conditions. The experiments were conducted with horizontal micro channel under both adiabatic (for friction factor calculation) and diabatic (for Nusselt number calculation) conditions. The results indicated that the experimental Darcy friction factor can be predicted well with conventional scale fanning friction factor correlations for developing flow in laminar region by shah and London (1978) correlation for two models. Also, the experimental Nusselt number Agree well with each correlation of shah and London (1978) and Mirmanto correlation in laminar region.

تم في البحث الحالي اجراء دراسة تجريبية للجريان احادي الطور وانتقال الحرارة لقناة مايكرويه مفردة. لدراسة تأثيرالتجاويف الصناعية على الجريان وانتقال الحرارة أحادي الطور لقناة مايكروية، تم تصميم وتصنيع نموذجين للقناةالمايكروية من النحاس النقي. النموذج الاول يمثل قناة مايكروية ذات سطح املس اما النموذج الثاني فيمثل قناة مايكرويةيحتوي سطح قاعدتها على 47 تجويفًا اصطناعيًا موزَّعًا بشكل منتظم على طول القناة. كلا النموذجين لهما نفس الابعادالتصميمية بارتفاع ) 300 ( مايكرون وعمق ) 300 ( مايكرون بينما قيمة البعد الحقيقي هي ) 367 ( مايكرون للعرض و( 296 ( مايكرون للعمق. تم استخدام المياه غير المؤينة كمادة للعمل التجريبي عند درجة حرارة دخول 30 درج ة مئويةمع أرقام رينولدز تتراوح من ) 700 إلى 2200 ( تغطي ظروف التدفق الطباقي. بينت النتائج العملية أن معامل الاحتكاكدارسي يمكن التنبؤ به جيدًا من خلال العلاقات التقليدية للباحثين shah and London (1978) للجريان الطباقي في طورالنمو وايضا كانت النتائج العملية لعدد ناسلت تتفق بشكل جيد النتائج الباحثين shah and London (1978) وايضاMirmanto (2012} }