TY - JOUR ID - TI - Cr2O3:TiO2 Nanostructure Thin Film as NH3 Gas Sensor prepared by Pulsed Laser Deposition technique أوكسيد الكروم(Cr2O3) المطعم بأوكسيد التيتانيوم( (TiO2 النانوي التركيب كغشاء رقيق والمحضر بتقنية ترسيب الليزر النبضي والمستخدم كمتحسس لغاز الامونيا(NH3) AU - Saadoon M. AbdulKareem سعدون متعب عبد الكريم AU - Mahdi.H.Suhail مهدي حسن سهيل AU - Ismael K. Adehmash اسماعيل خليل جاسم PY - 2018 VL - IS - 5 SP - 37 EP - 54 JO - Journal of College of Education مجلة كلية التربية SN - 18130380 AB - Titanium oxied (TiO2) dopant chromium oxied (Cr2O3) nanoparticles have been prepared using pulsed laser deposition (PLD) method at different concentration (3,5,7,9)wt % of TiO2 . The effect of TiO2 dopant on the crystallite size of the synthesized nanoparticles is examined by X-ray diffraction using Scherrer equation. Films morphology are characterized by atomic force microscopy (AFM). Optical properties are estimated in the ultra violet visible light (UV-Vis) absorption spectroscopy. It's showing that optical band gap rate range from( 2.55 to 2.68) eV is very red shifted in compare with bulk of Cr2O3 (~3eV). There is showing that samples compose are being attributed to the improvement of the confinements quantum influence . The gas sensitivity, response and recovery times of the sensor in the presence of NH3 gas were studied and discussed. In presence work we found that, the sensitivity increase when increase doping ratio of TiO2and return to decrease when increases concentrations from (7 to 9)%wt .The optimum concentrations ratio for NH3 gas sensitivity at 5%wt TiO2 which reveal sensitivity of (75%) at 250oC .

أوكسيد الكروم النانوي (Cr2O3) المطعم بأوكسيد التيتانيوم TiO2 النانوي الذي تم تحضيره بطريقة ترسيب الليزر النبضي وبنسب تركيز مختلفة (9,7,5,3)% من أوكسيد التيتانيوم . لقد تمت دراسة تأثيرنسب التطعيم لأوكسيد التيتانيوم في معدل الحجم البلوري للبنية التركيبية النانوية وتم فحصها باستخدام حيود الاشعة السينية XRD)) وكذلك طبوغرافية السطح تم مناقشتها وفحصها باستخدام مجهر القوة الذرية ((AFMوقد لوحظ ان قيم فجوة الطاقة البصرية تتراوح بين ( 2,68الى 2,55) الكترون فولت عندما تزداد نسبة التطعيم من(3 الى 9)% باستخدام مطياف امتصاص الاشعة (ضوء مريء- فوق بنفسجية ) وكانت تنزاح بشدة نحو طيف اللون الاحمر مقارنتا مع هيكل اوكسيد الكروم ( 3 الكترون فولت ) وهذا يشير الى ان البنية التركيبية للعينات كانت تعزز التأثير الكمي .تحسسية الغاز وزمن الاستجابة للمتحسس بوجود غاز أوكسيد النيتروجين (NH3) تم دراستها ومناقشتها . في هذا البحث وجدنا ان التحسسية تزداد عند زيادة نسبة التطعيم ( 3 الى 5) % ثم تعود تتناقص فوق ذلك . افضل نسبة تركيز لكي نتحسس غاز NH3 كانت عند نسبة تطعيم 5% وقد ظهر ان اكبر مقدار للتحسسية 168,75 % و زمن الاستجابة 30ثانيه عند درجة حرارة 200 سيليزي .كذلك وجد انه كلما تزداد درجة حرارة التشغيل تزداد التحسسية وان زمن الاستجابة يقل. ER -