@Article{, title={Studying the Effect of Nano Filler on Epoxy Properties used in storage tank Low Carbon Steel Protection دراسة تأثير الحشوة النانوية على خصائص الايبوكسي المستعمل في طلاء الفولاذ واطئ الكاربون}, author={Israa Abdulsatar Esmael اسراء عبد الستار اسماعيل and Nadia Fakhry Ibraheem نادية فخري ابراهيم and Faris Moayed Ahmed فارس مؤيد احمد}, journal={Journal of Petroleum Research & Studies مجلة البحوث والدراسات النفطية}, volume={}, number={29}, pages={121-136}, year={2020}, abstract={In this study a nano epoxy coating had been prepared to be used for the protectionof the internal and external surfaces of storage tank (low carbon steel) from corrosion. Apolymeric coating was reinforced with fillers such as red iron oxide, Zinc phosphate andnano titanium dioxide (TiO2) which have been used as anticorrosion. Pieces from lowcarbon steel was picked from storage tank and coated with two layers, the first layer wasprepared from organic polymer (epoxy) with red iron oxide, the second layer wasprepared from epoxy with (a nano titanium dioxide and Zinc phosphate).The fillers weight percentages were (0, 7, 10 and 13 % wt). The nano epoxy coatinggave good results in limiting the corrosion, the corrosion rate results show that the bestpercentage of additives was (13,10 % wt) in salt solution 1.0 %wt ( NaCl, Na2SO3 andKCl ).The coating samples were immersed for 3 month at 25 OC in gas oil and cuttingoil then was characterized using spectroscopic method (FTIR), physical and chemicaltests add to characterization of particles size was done by SEM. The samples of TiO2were characterized by XRD and evaluation of corrosion was made by using staticpotential test.

في هذه الدراسة تم تحضير طلاء الايبوكسي النانوي المستعمل في حماية السطوح الخارجية والداخليةلخزان الوقود (فولاذ واطئ الكاربون) من التأكل وتم تقوية الطلاء البوليمري بحشوات مثل اوكسيد الحديدوالتي تم استخدامهم ضد التاكل وتم اخذ قطع (TiO الاحمر وفوسفات الزنك مع ثاني اوكسيد التيتانيوم النانوي ( 2من فولاذ واطئ الكاربون من خزان الوقود وطلية بطبقتين، اول طبقة كانت محضرة من بوليمر عضوي(ايبوكسي) مع اوكسيد الحديد الاحمر، ثاني طبقة تم تحضيرها من الايبوكسي مع (ثاني اوكسيد التيتانيوم13 ) %. الطلاء الايبوكسي النانوي أعطى نتائج , 10, 7 , وفوسفات الزنك) وكانت النسب الوزنية للحشوات ( 013 ) في , جيدة في الحد من التاكل ونتائج التاكل اظهرت بان استعمال احسن نسبة للمضافات كانت % ( 10وتم غمر نماذج الطلاء لمدة ثلاثة اشهر في ( KCl مع Na2SO و 3 NaCl) المحلول الملحي 1.0 % لكل منوفحوصات كيميائية (FTIR ) 250 في زيت الغاز وزيت القطع ثم تم تشخيصها باستخدام طريقة C درجةحيود الاشعة (XRD) بواسطة TiO وتشخيص نماذج 2 SEM وفيزياوية و تشخيص الحجم الحبيبي بواسطةالسينية وتم قياس التاكل بواسطة أستعمال جهاز المجهاد الساكن.} }