TY - JOUR ID - TI - Effect of Cyclic Heat Treatment on Microstructure and Mechanical Properties of AA 6061-T6 Aluminum Alloy تأثير المعاملات الحرارية المتكررة على البنية المجهرية والخواص الميكانيكية لسبيكة الالمنيوم 6061-T6 AU - Najmuldeen Yousif Mahmood نجم الدين يوسف محمود AU - Ahmed Ameed Zainulabdeen احمد عميد زين العابدين AU - Jabbar Hussein Mohmmed جبار حسين محمد AU - Hasanain Abd Oun حسنين عبد عون PY - 2020 VL - 23 IS - 4 SP - 383 EP - 387 JO - Al-Nahrain Journal for Engineering Sciences مجلة النهرين للعلوم الهندسية SN - 25219154 25219162 AB - The effects of the repeated solution heat treatment on hardness, tensile strength and microstructure of aluminum were investigated. For this purpose, an alloy of AA6061-T6 was undergo to cyclic solution heat treatment process which is composed of repeated period (10 min) held at 520 °C for 1, 4, 8 and 12 cycles. The hardness was tested for five aging times (as quenching, one week, three weeks, one month and five months) to all cycles (1, 4, 8 and 12) firstly and it is found that the hardness of five months as aging time for all cycles has the best results (90Hv) as compared with others (as quenching, one week, three weeks, and one month), so it was adopted for all cycles to implement the tensile test and the microstructure. Hardness results were improved to Vickers hardness of (90Hv) with increasing of cycles up to 8 cycles then decreasing after that to (45Hv). Tensile results were showed an increment (34%) also for the same group of 8 cycles compared with (17%) and (9%) for 4 and 12 cycles, respectively. Microstructure is revealed that whenever cycles are increased, the precipitate phase in alloy is increased also, thus, it is improved the hardness and tensile strength.

تم التحقق من تاثير المعاملات الحرارية المتكررة على خواص الصلادة ، الشد والبنية المجهرية للالمنيوم. لهذا الغرض تم تعريض سبيكة الالمنيوم 6061-T6 لاجراء المعاملات الحرارية المتكررة والتي تتكون من 10 دقيقة عند 520°C لمرة ، 4 مرات ، 8 مرات و 12 مرة. تم فحص الصلادة لخمسة ازمان (التقسية بالتصليد ، اسبوع ، ثلاث اسابيع ، وشهر واحد وخمسة اشهر) تعتيق لجميع المرات (لمرة ، 4 مرات ، 8 مرات و 12 مرة) ووجد ان خمسة اشهر كزمن تعتيق لجميع المرات اعطت افضل النتائج (90Hv) مقارنة مع الباقي (التقسية بالتصليد ، اسبوع ، ثلاث اسابيع و وشهر واحد) ولهذا تم تعميمها على جميع الحالات بالنسبة لاختبار الشد والبنية المجهرية. نتائج الصلادة تحسنت الى (90Hv) مع زيادة المرات حتى 8 مرات ومن ثم تناقصت بع ذلك الى (45Hv). نتائج الشد اظهرت زيادة (34%) ايضا لنفس مجموعة 8 مرات مقارنة مع (17%) و (9%) لـ 4 مرات و 12 مرة على التوالي. البنية المجهرية بينت انه كلما المرات تزايدت ، الطور المترسب في السبيكة ازداد ايضا وهذا ما يحسن مقاومة الشد والصلادة. ER -