TY - JOUR ID - TI - Flow Measurements in Open Channels Using Integrating-Floats قياس الجريان في القنوات المفتوحة باستخدام العوامات التفاضلية AU - Basim Sh. Abed باسم شبع عبد PY - 2021 VL - 27 IS - 1 SP - 130 EP - 141 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - The flow measurements have increased importance in the last decades due to the shortage of water resources resulting from climate changes that request high control of the available water needed for different uses. The classical technique of open channel flow measurement by the integrating-float method was needed for measuring flow in different locations when there were no available modern devices for different reasons, such as the cost of devices. So, the use of classical techniques was taken place to solve the problem. The present study examines the integrating float method and defines the parameters affecting the acceleration of floating spheres in flowing water that was analyzed using experimental measurements. The method was investigated theoretically, as well as many experimental tests in a fixed floor laboratory flume were conducted. Different sizes of solid plastic spheres with different weights were used as floats to measure velocities and then discharge computation. The results indicate that the integrating-float technique is feasible and accurate for measuring low flow velocity in open channels. It was desirable to use small floats with specific gravity closer to unity to get more accurate results. The measured velocities and the estimated discharges were compared with discharges obtained using some other common laboratory measuring techniques. Good agreement was obtained between the integrating-float method results with the results of velocities obtained using other measurement techniques, with an error of less than 2.5%.

ازدادت أهمية قياسات الجريان في العقود الماضية بسبب نقص الموارد المائية الناتج عن التغيرات المناخية التي تتطلب تحكمًا كبيرًا في المياه المتاحة اللازمة للاستخدامات المختلفة. كانت هناك حاجة إلى التقنية الكلاسيكية لقياس تصاريف القنوات المفتوحة بطريقة الطوافات التكاملية لقياس الجريان في مواقع مختلفة عندما لا تكون الأجهزة الحديثة متاحة لأسباب مختلفة ، منها تكلفة الأجهزة. لذلك ، تم استخدام التقنيات الكلاسيكية لحل تلك المشكلة. تهدف الدراسة الحالية إلى فحص طريقة العوامات التفاضلية وتحديد العوامل المؤثرة في تسريع الكرات العائمة في المياه المتدفقة والتي تم تحليلها باستخدام القياسات التجريبية. تم دراسة الطريقة نظريًا ، كما تم إجراء العديد من الاختبارات التجريبية في قناة مختبرية ذات أرضية ثابتة. تم استخدام أحجام مختلفة من الكرات البلاستيكية الصلدة ذات الأوزان النوعية المختلفة كعوامات لقياس السرع ثم تم حساب التصريف. اشارت النتائج إلى أن تقنية العوامات التفاضلية كانت مجدية ودقيقة لقياس سرعة الجريانات المنخفضة في القنوات المفتوحة ، وكان من المستحسن استخدام عوامات صغيرة ذات اوزان نوعية أقرب مايمكن إلى الواحد للحصول على نتائج أكثر دقة. تمت مقارنة السرعات المقاسة والتصاريف المقدرة بطريقة العوامات التفاضلية مع التصاريف التي المقاسة باستخدام تقنيات مختبرية شائعة اخرى. كان التوافق بالنتائج جيدا ونسبة الخطأ اقل من 2.5٪. ER -