@Article{, title={Study the Structural Properties and Surface Morphology of CdO Thin Films Prepared by Chemical Spray pyrolysis دراسة الخصائص التركيبية والتشكيل السطحي لأغشية CdO الرقيقة المحضرة بالرش الكيميائي الحراري}, author={Karrar Mahdi Saleh كرار مهدي صالح}, journal={Journal of Kufa - physics مجلة الكوفة للفيزياء}, volume={12}, number={02}, pages={1-11}, year={2020}, abstract={CdO films were prepared using a chemical spray paralysis (CSP) method on the glass substrate at a temperature of 350 ° C and thickness (260 ± 15 nm), and study the effect annealing time (0, 1, 1.5, 2, 2.5) h at annealing temperature 450 °C on structural properties.The X-ray diffraction pattern the results showed that all CdO thin films have a polycrystalline structure and a prevalent growth in the direction (111), and the average grain size (G) in this direction ranges (29.80 - 33.23) nm. It generally increases in value while the agitation values, extraction density, number of crystals decrease by increasing the annealing time (0-2)h at annealing temperature 450 ° C of thin films. From the resulted of the atomic force microscope (AFM), the surface roughness, medium square root (RMS) and average grain size increase with the increasing of the annealing time (0-2) h, at annealing temperature 450 ° C. The thin film with annealing time 2.5 h at annealing temperature 450 °C . We note a slight decrease in the values of the coefficients ( XRD and AFM) Due to the changes in the crystal structure of thin films and beginning of cracks and crystal defects generated on the surface of the thin film during the annealing process. It has been observed in practice that the increase in the annealing time to 3 h at annealing temperature 450 ° C. led to the separation of the thin film from the substrates.

تم تحضير أغشية CdO باستخدام طريقة الرش الكيميائي الحراري(CSP) على قواعد زجاجية عند درجة حرارة 350 درجة مئوية وسمك (260 ± 15 نانومتر) ، ودراسة تأثير زمن التلدين (0 ، 1 ، 1.5 ، 2 ، 2.5) ساعة عند درجة حرارة التلدين 450 درجة مئوية على الخصائص التركيبية.نمط حيود الأشعة السينية أظهرت النتائج أن جميع أغشية CdO الرقيقة لها بنية متعددة البلورات ونمو سائد في الاتجاه (111) ، ومتوسط حجم الحبوب (G) في هذا الاتجاه يتراوح (29.80 - 33.23) نانومتر. تزداد قيمته بشكل عام بينما تنخفض قيم المطاوعة وكثافة الانخلاعات وعدد البلورات بزيادة وقت التلدين (0-2) ساعة عند درجة حرارة التلدين 450 درجة مئوية للأغشية الرقيقة. نتيجة مجهر القوة الذرية (AFM) ، تزداد خشونة السطح ، الجذر التربيعي المتوسط (RMS) ومتوسط حجم الحبوب مع زيادة زمن التلدين (0-2) ساعة ، عند درجة حرارة التلدين 450 درجة مئوية. مع وقت التلدين 2.5 ساعة عند درجة حرارة التلدين 450 درجة مئوية. نلاحظ انخفاضًا طفيفًا في قيم المعامِلات (XRD و AFM) بسبب التغيرات في التركيب البلوري للأغشية الرقيقة وبداية الشقوق والعيوب البلورية المتولدة على سطح الغشاء الرقيق أثناء عملية التلدين. لقد لوحظ في الممارسة العملية أن الزيادة في وقت التلدين إلى 3 ساعات عند درجة حرارة التلدين 450 درجة مئوية أدت إلى فصل الغشاء الرقيق عن القواعد.} }