TY - JOUR ID - TI - Analysis of Composite Panels of Profiled Steel Sheet with Ferrocement by Using Finite Element Method AU - Dr. Nabeel Abdulrazzaq Jasim(1) M. Sc. Mohammed Abd Al-baqer Jennam(2) PY - 2019 VL - 14 IS - 4 SP - 140 EP - 162 JO - Univesity of Thi-Qar Journal مجلة جامعة ذي قار العلمية SN - 27066894 27066908 AB - This paper concerns with the application of finite element technique to the nonlinear analysis of the behavior of profiled steel sheet ferrocement (PSSF) composite panels. The composite panels were analyzed using nonlinear three dimensional finite element models. The constitutive models of the nonlinear material behavior for ferrocement matrix, PSS, and steel wire mesh were used. ANSYS version 16.1 program code was used to analyze the three dimensional model. Ferrocement was modeled by using the 8-noded isoperimetric brick elements (SOLID65) with three degrees of freedom, while the profiled steel sheet was modeled as SHELL181 element with four-node element with six degrees of freedom at each node: translations in the x, y, and z directions, and rotations about the x, y, and z-axes. A nonlinear spring element, COMBIN14, was used to represent the mechanical connectors, while to simulate the adhesive epoxy layer solid element SOLID185 was used. It was defined by eight nodes having three degrees of freedom at each node: translations in the nodal x, y, and z directions. The wire mesh reinforcement was modeled as a volume ratio distributed within the ferrocement brick elements. The analytical results of load-deflection response have been compared with available experimental works.

يتضمن هذا البحث استخدام تقنية العناصر المحددة في التحليل الغير الخطي لسلوك الألواح المركبة المصنوعة من صفائح الفولاذ المضلعة والمربوطة بالواح الفيروسمنت .واستخدمت علاقات السلوك اللاخطي للفیروسمنت و صفائح الفولاذ المضلعة و شبكة التسلیح. وتم اعتماد برنامج ANSYS version 16.1 لتحلیل النموذج الثلاثي البعد، و جرت نمذجة الفیروسمنت باستخدام عناصر من نوع SOLID 65 بثمانیة عقد ونمذجة صفائح الفولاذ المضلعة بعناصر SHELL181 بأربعة عقد فقط. استخدم COMBIN14 لتمثيل سلوك البراغي المعدنية، ولمحاكاة طبقة الايبوكسي اللاصقة استخدام عنصر صلب SOLID185. أما شبكة التسلیح فقد تمت نمذجتھا كنسبة من الحجم ضمن عناصر الفیروسمنت.و تم افتراض ترابط تام بین الفیروسمت وشبكة التسلیح. ووجد بان نماذج العناصر المحددة تعطي قیم للأحمال القصوى وللإزاحات ذات اتفاق جید مع النتائج المختبریة. ER -