TY - JOUR ID - TI - NUMERICAL TEST OF LOWER ARM VEHICLE USING FINITE ELEMENT ANALYSIS AND STATISTICAL METHOD التحليل العددي لمركبة ذراع التعليق السفلي بأستخدام طريقة العناصر المحددة وطريقة أحصائية AU - Naseer H. Farhood1 نصير حامد فرهود PY - 2021 VL - 21 IS - 1 SP - 67 EP - 79 JO - Iraqi journal of mechanical and material engineering المجلة العراقية للهندسة الميكانيكية وهندسة المواد SN - 20761819 AB - The aim of this study to investigate the influencing factors of the lower suspension arm by integrating finite element technique with response surface methodology (RSM). Response surface methodology has been widely used to predict stress von Mises on lower arm systems models. Aluminum alloys (AA7075-T6) are selected as a suspension arm materials. The structural model of the suspension arm was developed utilizing the Solid works. The finite element model and analysis were performed utilizing the finite element analysis code. The finite element model is correlated with design of experiments (DOE) modal test. Influences of the various factors namely; mesh size, load are investigated using RSM. A mathematical prediction model has been developed based on the most influencing factors and the validation simulation analysis proved its adequacy. The results show that there is no abnormality in the methodology adopted (R2 =0.8406). Ratio greater than 4 is desirable; Model’s ratio of 8.183 indicates an adequate signal. The Model F-value of 5.65 implies the model is significant. RSM was used to design the experiments and analyzed the results obtained. RSM aimed towards prediction stress on lower arm through the various factors of the suspension arm geometrical construction.

تهدف هذه الدراسة إلى معرفة العوامل المؤثرة في ذراع التعليق السفلي بدمج تقنية العناصر المحدودة مع منهجية سطحالاستجابة ) RSM (. تم استخدام منهجية سطح الاستجابة على نطاق واسع للتنبؤ بالإجهاد فون ميزس في نماذج أنظمةالذراع السفلى. يتم اختيار سبائك الألومنيوم ) AA7075-T6 ( كمواد ذراع تعليق. تم تطوير النموذج الهيكلي لذراع التعليقباستخدام الأعمال الصلبة. تم إجراء تحليل ونموذج العنصر المحدود باستخدام كود تحليل العناصر المحدودة. يرتبط نموذجالعناصر المحدودة بتصميم التجارب النموذجية ) DOE (. تأثيرات العوامل المختلفة وهي؛ حجم الشبكة، يتم فحص الحملباستخدام تقنية RSM . تم تطوير نموذج التنبؤ الرياضي بناءً على العوامل الأكثر تأثيرًا وأثبت تحليل محاكاة التحقق كفاءته.أظهرت النتائج عدم وجود شذوذ في المنهجية المتبعة ) R2 = 0.8406 (. النسبة الأكبر من 4 مرغوبة؛ تشير نسبة الطراز8.183 إلى أن الأشارة مناسبة. في حين تشير قيمة النموذج F البالغة 5.65 إلى أن النموذج مهم. تم استخدام RSM لتصميمالتجارب وتحليل النتائج التي تم الحصول عليها. تهدف RSM إلى التنبؤ بالإجهاد على الذراع السفلي من خلال العواملالمختلفة للتركيب الهندسي لذراع التعليق. ER -