TY - JOUR ID - TI - Removal of Congo Red Dye From Aqueous Solution Using Eco-Friendly Adsorbent of Nanosilica إزالة صبغة الكونغو الحمراء من محاليلها المائية بأستخدام سطح صديق للبيئة محضر من النانوسيليكا AU - Inaam H. Ali انعام حسين علي PY - 2021 VL - 18 IS - 2 SP - 366 EP - 373 JO - Baghdad Science Journal مجلة بغداد للعلوم SN - 20788665 24117986 AB - The development of a new, cheap, efficient, and ecofriendly adsorbents has become an important demand for the treatment of waste water, so nano silica is considered a good choice. A sample of nanosilica (NS) was prepared from sodium silicate as precursor and the nonionic surfactant Tween 20 as a template. The prepared sample was characterized using various characterization techniques such as FT-IR, AFM, SEM and EDX analysis. The spectrum of FTIR confirms the presence of silica in the sample, while SEM analysis of sample shows nanostructures with pore ranging (2-100nm).The adsorptive properties of this sample were studied by removing Congo red dye (CR) from aqueous solution. Batch experimental methods were carried out at room temperature (25⁰C) to study the different variables which affect the adsorption process like: NS amount, initial concentration of CR, and contact time. The results were 0.2 g of NS/50 ml of dye solution and 60 min contact time to reach equilibrium. The experimental results at equilibrium were analyzed using Langmuir and Freundlich adsorption isotherms and showed the best fitted with Freundlich model which reveal heterogeneity of the surface of NS adsorbent. Kinetics aspects were also investigated by evaluating parameters from pseudo- first and pseudo-second order reaction equations on adsorption rate which show good fitting with both kinetics equations, but pseudo-second order equation was the best to describe the kinetics parameters.

أصبح تطوير مواد مازة جديدة ورخيصة وصديقة للبيئة مطلبا مهما لمعالجة مياه الصرف، وتعتبر النانوسيليكا (NS)ا خيارا جيدا. في هذا البحث تم تحضير نموذج من النانوسيليكا باستخدام سيليكات الصوديوم كمصدر سيليكوني والسطح الفعال غير الايوني (Tween 20) كقالب. تم تشخيص النموذج المحضر باستخدام عدة تقنيات مثل EDX, SEM, AFM, FT-IR ، حيث أكد طيف FT-IR على وجود السيليكا في العينة ، اما تحليل SEM فأظهر وجود هياكل نانوية تتراوح مساميتها من (20-100 نانوميتر). تم دراسة الخواص الامتزازية لهذا النموذج عن طريق إزالة صبغة الكونغو الحمراء من محاليلها المائية في درجة حرارة الغرفة (25م)باستخدام طريقة الدفعات لدراسة تأثير مختلف المتغيرات على عملية الامتزاز مثل كمية المادة المازة والتركيز الابتدائي وزمن الاتزان واعطت النتائج افضل كمية للمادة المازة 0.2 غم من النانوسيليكا لكل 50 مل من محلول الصبغة و60 دقيقة هو الزمن اللازم للوصول الى حالة الاتزان. تم تحليل النتائج العملية المستخرجة بأستخدام معادلتي لانكماير وفرندلج والتي اظهرت تطابقا كبيرا مع معادلة فرندلج التي تكشف عن عدم تجانس السطح الماز. كذلك تم دراسة حركية عملية الامتزاز بتطبيق معادلتي الدرجة الاولى والثانية الكاذبة واعطت المعادلتان تطابقا كبيرا مع النتائج الا ان معادلة المرتبة الثانية الكاذبة كانت الافضل لتفسير حركية الامتزاز. ER -