@Article{, title={Effect of Yttrium Oxide on Mechanical and Physical Properties of Fe–10%Cu Composite تأثير أوكسيد اليتيريوم النانوي على الخواص الميكانيكية والفيزيائية لمتراكب حديد – 10%نحاس}, author={Farouk M. Mahdi and Omar H.Mahmood}, journal={Tikrit Journal of Engineering Sciences مجلة تكريت للعلوم الهندسية}, volume={27}, number={3}, pages={67-72}, year={2020}, abstract={ron-based composites have found a lot of industrial applications such as bearings,camshafts, connecting rods, pulleys, various valves, oil pump gears and many otherapplications in the automotive and other industries due to their low cost,availability, and high strength. The present study aims to prepare Fe-10 vol.% Cu- (0 – 5) wt.% nano Y2O3 composites by powder metallurgy technique and studyingtheir physical and mechanical properties. The powders were mixed into ball millfor 30 minutes, followed by room temperature uniaxial compaction at 700 MPa for3 minutes. The green specimens were sintered at 1000 oC for 1 hour. The results ofthe present study showed that nano yttrium oxide has significant effects on bothphysical and mechanical properties of Fe-10%Cu composite. The bulk density wasincreased by 0.92% and the true porosity was decreased by 6.4% on increasing thenano oxide content from 0% to 3% respectively. Vickers microhardness wasincreased by 5.9% on increasing Y2O3 up to 1% followed by gradual decrease onfurther increase above 1%. Wear rate was decreased by 21% on increasing the nanooxide content from 0% to 3%. On the other hand, the compressive strength wasdecreased by 47% on increasing Y2O3 up to 5%.

وجدت متراكبات االساس الحديدي تطبيقات صناعية عديدة منها كراسي التحميل وأعمدة الحدبات وأذرع التوصيل والبكرات والصمامات وتروس مضخاتالزيت وتطبيقات كثيرة أخرى في صناعة السيارات وغيرها من الصناعات بسبب وفرة المساحيق الحديدية وانخفاض كلفتها، عالوة على مقاومتها العالية.تهدف الدراسة الحالية الى تحضير متراكبات حديد-10%نحاس- )0-5 %)اوكسيد االيتيريوم النانوي بطريقة ميتالورجيا المساحيق ودراسة خواصها الفيزيائيةوالميكانيكية. تم خلط المساحيق باستخدام طاحونة كرات فوالذية وتم تحضير النماذج عن طريق الكبس البارد أحادي االتجاه بضغط مقداره (700MPa(وابقائه تحت الضغط لمدة )3 )دقائق. لبدت النماذج الخضراء بدرجة حرارة (C°1000 (لمدة ساعة واحدة وتركت لتبرد داخل الفرن إلى درجة حرارةالغرفة. اظهرت النتائج وجود تأثير فاعل ألوكسيد االيتيريوم النانوي على الخواص الفيزيائية والميكانيكية للمتراكب، إذ زادت الكثافة بنسبة (92.0 (%وانخفضت المسامية بنسبة (4.6 (%مع زيادة محتوى اوكسيد االيتيريوم من 0 %إلى 3 %على التوالي. وزادت الصالدة بنسبة(89.5 (%عند زيادة محتوىاألوكسيد النانوي لغاية 1 %ثم انخفضت تدريجيا بزيادة محتواه فوق هذه النسبة. اما معدل البلى فقد قل بنسبة (21(%مع زيادة نسبة األوكسيد النانوي من 0 %إلى .3%على الجانب اآلخر أظهرت نتائج مقاومة االنضغاط انخفاضا تدريجيا بزيادة محتوى اوكسيد االيتيريوم إذ انخفضت مقاومة االنضغاط بمقدار(47 (%بعد زيادة نسبة األوكسيد النانوي من 0 %إلى .5. %} }