TY - JOUR ID - TI - The Assessment of Using CFRP to Enhance the Behavior of High Strength Reinforced Concrete Corbels تقييم استخدام الياف الكاربون البوليمربة لتحسين تصرف الكتائف الخرسانية المسلحة عالية المقاومة AU - Mazin B. Abdulrahman مازن برهان الدين عبد الرحمن AU - Shakir A. Salih شاكر احمد صالح AU - Rusul J. Abduljabbar رسل جمال عبد الجبار PY - 2021 VL - 28 IS - 1 SP - 71 EP - 83 JO - Tikrit Journal of Engineering Sciences مجلة تكريت للعلوم الهندسية SN - 1813162X 23127589 AB - In this research, an experimental study is conducted to investigate the behaviorand strength of high strength reinforced concrete corbels externally bonded withCFRP fabric sheets and Plates with different patterns taking into account theeffect of adopted variables in enhancing the ultimate strength; the effect of shearspan to effective depth (a/d), configuration, type and amount of bonding. Elevenhigh strength reinforced corbels were cast and tested under vertical loads. Testresults showed there was an improvement in the behavior and load carryingcapacity of all strengthened corbels. An increasing in the ultimate strength ofstrengthened corbel by inclined CFRP strips reached to (92.1%) while theincreasing reached to (84.21%) for using one horizontal CFRP Plates comparedto un-strengthened reference specimen. Also, it can be conducted that theincrease of (a/d) ratio from (0.6 to 0.8) resulted in decreasing by 21.05% inultimate load capacity of corbels and from (0.4 to 0.6) by 31.25% and 58.69% incracking and ultimate loads respectively.

يتضمن البحث اجراء دراسة عملية عن تصرف ومقاومة الكتائف الخرسانية المسلحة عالية المقاومة المقواة بشرائط و صفائح الياف الكاربون بمختلفانماط التقوية مع اخذ بنظر االعتبارتاثير المتغيرات التالية في السلوك والمقاومة القصوى للكتائف; تأثير نسبة فضاء القص الى العمق الفعال )d/a ,(اتجاه,نوع وعدد شرائط او صفائح الياف الكاربون البولميرية المستخدمة . تم فحص احد عشر نموذج من الكتائف الخرسانية تحت تاثير االحمال العموديةفقط.أظهرت النتائج تحسن سلوك وسعة تحمل للكتائف المقواة وان زيادة المقاومة القصوى قد بلغت 1.92 %للكتائف المقواة بشرائط الياف الكاربونباتجاه الربط المائل بينما بلغت الزيادة 21.84 %للكتائف المقواة باستخدام صفائح الياف الكاربون باألتجاه األفقي بالمقارنة مع نموذج الكتف غير المقوى.لوحظ ان زيادة نسبة فضاء القص الى العمق الفعال d/a من ) 6,0 الى 8,0 )سببت نقصان بمقدار 05,21 %في مقاومة التحمل القصوى للكتائف بينمازيادة نسبة فضاء القص الى العمق الفعال من 4,0 الى 6,0 سببت نقصان بمقدار25,31 %و 69,58 % في حمل التشقق والحمل االقصى . ER -