TY - JOUR ID - TI - Improvement of Surface Roughness Quality for Stainless Steel 420 Plate Using Magnetic Abrasive Finishing Method تحسين جودة نعومة السطح لصفائح الصلب نوع (240) باستخدام AU - Yahya M. Hamad يحى محي حمد PY - 2010 VL - 6 IS - 4 SP - 10 EP - 20 JO - Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية SN - 18181171 23120789 AB - An experimental study was carried out to improve the surface roughness quality of the stainless steel 420 using magnetic abrasive finishing method (MAF). Four independent operation parameters were studied (working gap, coil current, feed rate, and table stroke), and their effects on the MAF process were introduced. A rotating coil electromagnet was designed and implemented to use with plane surfaces. The magnetic abrasive powder used was formed from 33%Fe and 67% Quartz of (250µm mesh size). The lubricant type SAE 20W was used as a binder for the powder contents. Taguchi method was used for designing the experiments and the optimal values of the selected parameters were found. An empirical equation representing the relation between surface roughness with operation parameters have been achieved.

تم في هذا البحث اجراء دراسة عملية لتحسين جودة السطح من حيث الخشونة للصلب المقاوم نوع 420 باستخدام طريقة الحث المغناطيسي وذلك بدراسة تاثير أربعة عوامل تشغيلية وهي:1- الفراغ بين القطب المحث والمشغولة و2- التيار و3- سرعة التغذية و 4- أشواط التغذية. تم تصميم وتصنيع محاث كهرومغناطيسي ذو ملف دوار للاستخدام في التجارب. تم استخدام مسحوق تنعيم (33% حديد و 67 % كوارتز) بنعومة (µm 250 ) واضافة الزيت نوع SAE 20W كمادة رابطة بين مكونات المسحوق . أستخدمت طريقة Taguchi لتصميم منظومة التجارب ومن ثم ايجاد القيم المثلى لعوامل التشغيل حيث تم ايجاد معادلة تجريبية تمثل العلاقة بين نسبة التغيير في خشونة السطح والعوامل التشغيلية المدروسة. ER -