@Article{, title={Studying the Factors Effect on the Flowability of(ZnO – CuO/ Al2O3) Catalyst with Blending of Different Lubricantsthrough Hopper دراسة العوامل المؤثرة على انسيابية العامل المساعد(Al2O3 (ZnO – CuO/ مع مزج مزيتات مختلفة خلال القمع}, author={Ali Yasseen Nasir علي ياسين ناصر and Mazin A. H. Radhi مازن عبد الهادي راضي and Malek M. Mohammed مالك مصطفى محمد}, journal={Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية}, volume={5}, number={4}, pages={18-24}, year={2009}, abstract={One of the most important problems in tablet process is to control the flow of the catalyst through the hopper; Controlling the flow can be done either by changing the size of particles or added the different lubricant (stearic acid, starch, graphite) or blending of different lubricants. The study showed that we can control (increase or decrease) on the flow of the catalyst through the hopper by blending different lubricants for the constant percentage. The flow increasing when particles size (0.6 mm) and then decrease with or without lubricants, no effect on flow when particles size lower than (0.2 mm) with use that lubricants, and good flow on (0.4 mm) when use stearic acid and starch.

احدى اهم المشاكل في عملية الكبس هي السيطرة على جريان العامل المساعد خلال القمع, السيطرة على الجريان يمكن ان يعمل اما بتغيير حجم جزيئات العامل المساعد او أضافة المزيتات المختلفة (حامض الستريك, النشا و الكرافيت) او مزج مزيتات مختلفة. الدراسة بينت بأننا يمكن ان نسيطر (زيادة او نقصان) على جريان العامل المساعد خلال القمع بمزج المزيتات المختلفة للنسب المئوية الثابتة. الجريان يزداد عندما حجم الجزيئات (0,6 مم) وبعد ذلك يتناقص مع او بدون المزيتات, لا تأثير على الجريان عندما ينخفض حجم الجزيئات عن (0,2 مم) مع استعمال تلك المزيتات, وجريان جيد في (0,4 مم ) عند استعمال حامض الستريك والنشا.} }