TY - JOUR ID - TI - Numerical and Physical Modelling to Dissipate the Flow Energy of Spillway Using Multiple Rows of Chute Blocks النمذجة العددية والفيزيائية في تشتيت طاقة جريان مسيل مائي بأستخدام صفوف متعددة لكتل المزلق AU - Zeyad Ayoob Sulaiman زياد ايوب سليمان AU - Mena Ahmed Alsawaf مينا أحمد الصواف AU - Mohamed Saad Alhmdany محمد سعد الحمداني PY - 2022 VL - 27 IS - 1 SP - 172 EP - 180 JO - AL-Rafidain Engineering Journal (AREJ) مجلة هندسة الرافدين SN - 18130526 22201270 AB - Physical and Numerical models have been used to maximize the dissipation of flow energy of a sipllway, and to guarantee the occurring of hydraulic jump in the stilling basin in shorter length, and to find the right model to simulate turbulent flow properties using the techniques of Computational Fluid Dynamics (CFD). 5 models have been tested which they had different rows of chute blocks. For each, 6 slopes of chute were examined, 1:0.8, 1:1.0, 1:1.2, 1:1.4, 1:1.6, 1:1.8, with 10 cm of tail water. Physical models were emplemnted to represent a sucssecfully models that compared with the theoretical model in a slope 1:1.2 for chute. Using the RNG & K-є as a turbulent theoretical model and a non uniform distribution of the mesh led to sucssesfully simulating the stream lines, velosities and shape of hydraulic jumps and Froude numbers. Using four rows of choute blocks at the end of the chute near the edge is the best design to dissipate the energy, which was 61.9%, and for spillway slope of 1:0.8, while the percentage of energy dissipation that depending reducing the distance of the roller jump and reducing the distance of the supercritical flow was laid between (17.8, 94.8)%, respectively, when the spillway slope is 1:1.0.

لتعظيم تشتيت طاقة الجريان القادمة من المسيل المائي ولضمان حصول القفزة الهيدروليكية ضمن حوض االسكون وبأقل طول ممكن ولمعرفة مدى صلاحية استخدام ديناميكيات الموائع الحسابية (Computational Fluid Dynamics CFD) في تمثيل خصائص الجريان المضطرب تم اجراء استخدام النمذجة المزدوجة الفيزيائية والعددية لتمثيل حالة الجريان، حيث استخدمت 5 نماذج تحوي على كتل مزلق بأنماط مختلفة من حيث عدد صفوف الكتل (M1,M2,M3,M4,USBRII) وتم استخدام 6 ميول للمزلق (1:0.8, 1:1.0, 1:1.2, 1:1.4, 1:1.6, 1:1.8)، وكان عمق الماء الذيلي 10 سم. في النمذجة الفيزيائية تم استخدام جميع النماذج وبميل 1:1.2 للمزلق فقط وتمت مقارنة نتائجه بالنمذجة العددية حيث ان كلا النموذجين كانا قادرين على تمثيل حالة الجريان بنجاح من حيث شكل القفزة الهيدروليكية وارقام فرود وقيم السرعة، تم استخدام جميع النماذج وبكافة ميول المزلق في النمذجة العددية. وتم استخدام نموذج الاضطراب (RNG & K-є)، واستخدم كذلك شبكة غير منتظمة. افضل نموذج لتشتيت طاقة جريان المسيل المائي بلغت 61.9% للنموذج ذو اربع صفوف من كتل المزلق ولميل مزلق 1:0.8. اما بالاعتماد على نسبة تقليل مسافة منطقة تدوير القفزة ونسبة تقليل مسافة الجريان فوق الحرج فقد بلغت (17.8 , 94.8)% على التوالي ولميل مزلق 1:1.0 ولعمق ماء ذيلي 10 سم. ER -