TY - JOUR ID - TI - Catalytic Oxidative Desulfurization of Heavy Naphtha with Hydrogen Peroxide in the presence of Catalyst (PMN550) الاکسدة التحفیزیة لازالة الکبریت من النفثا الثقیل مع بیروکسید الهیدروجین والعامل المساعد (PMN550) AU - Najm AL-Mhanawi نجم المهناوي AU - Mohammed Ali Mutar محمد علي مطر PY - 2022 VL - 2 IS - 1 SP - 11 EP - 30 JO - Kerbala Journal for Engineering Sciences كربلاء للعلوم الهندسية SN - 27096718 AB - Catalytic oxidative desulfurization of the heavy naphtha fractions has been researched with the use of the air-assisted formic acid and H2O2 oxidation in the presence of the natural zeolite (PMN 550 )as the catalyst. The catalyst used was synthesized in the lab. and identified through FT-IR, AFM, BET, XRD, XRF, SEM, and TGA thermal analyses showed that the prepared catalyst has an efficient catalyst characteristic. The yield of the desulfurization in the cases of HN has been increased in the presence of the natural zeolite (PMN-550) and HN’s sulfur content has been decreased from 651.3 ppm to < 10 ppm in a 60 min period at a temperature of 90 Co, which has resulted in subsequent removal of sulfur compounds from octane phase. This oxidative treatment effectively reduced the sulfur content of heavy naphtha, and adsorption with PMN550 further reduced the sulfur content to below 9 mass ppm. A batch reactor was used to evaluate the performance of the prepared catalyst at different reaction temperatures (20-120 °C), and batch time (20-140 min.) with different amounts of natural zeolite (PMN550) catalyst. Numerous parameters of the design have been utilized for the determination of factors giving the optimal sulfur content removal from the HN in the batch modes. The studied operating conditions were the ratio of H2O2 to heavy naphtha, temperature, solution pH, catalyst weight and contact time.

وقد تم بحث إزالة الکبریت الأکسدة الحفازة من کسور النفتا الثقیلة مع استخدام حمض الفورمیک بمساعدة الهواء وأکسدة H2O2 فی وجود PMN 550 کمحفز. المحفز المستخدم تم تصنیعه فی المختبر. وحددت من خلال FT-IR، AFM، BET، XRD، XRF، SEM و TGA التحلیلات الحراریة أظهرت أن المحفز المعدة لدیها خصائص محفز کفاءة. وقد زاد العائد من إزالة الکبریت فی حالات HN فی وجود PMN-550 وانخفض محتوى الکبریت HN من 651.3 جزء فی الملیون إلى < 10 جزء فی الملیون فی فترة 60 دقیقة فی درجة حرارة 90 شرکة مما أدى إلى إزالة مرکبات الکبریت اللاحقة من مرحلة الأوکتان. وقد أدى هذا العلاج التأکسدی فی الحد الفعال من محتوى الکبریت HN، وامتصاص مع PMN 550 أدى إلى الحد من محتوى الکبریت بالإضافة إلى أقل من 9 جزء فی الملیون الشامل.تم استخدام مفاعل دفعی لتقییم أداء المحفز المعد فی درجات حرارة تفاعل مختلفة (20-120 درجة مئویة) ، ووقت الدفعة (20-140 دقیقة) بکمیات مختلفة من محفز PMN550. وقد استخدمت العدید من المعلمات للتصمیم لتحدید العوامل التی تعطی إزالة محتوى الکبریت الأمثل من HN فی وسائط الدفعة. وکانت ظروف التشغیل المدروسة هی نسبة H2O2 إلى النفتا الثقیلة ودرجة الحرارة ودرجة الحموضة الحلیة والوزن المحفز ووقت الاتصال. ER -