TY - JOUR ID - TI - Analysis of Galvanic Corrosion under Mass Transfer Controlled Conditions AU - Basim O. Hasan AU - Qasim. J.M Slaiman PY - 2007 VL - 13 IS - 3 SP - 1623 EP - 1636 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - Because of practical importance of protecting industrial equipments from galvanic corrosion, the need arises to analyze the effects of variables, such as temperature, velocity, and area fraction of metals on galvanic corrosion in systems under mass transfer control as in seawater (pH=7). For these reasons the galvanic corrosion of Fe-Zn is analyzed to study the influence of Reynolds number, temperature, and area fraction on the galvanic corrosion rates and galvanic corrosion potential under mass transfer control.It is found that galvanic corrosion rate of more active metal (Zn) is increased with Reynolds number while the corrosion rate of more noble metal (Fe) is slightly increased with Re depending on the galvanic potential that depends on the area fraction. Increasing Reynolds number shifts the galvanic potential to more positive values. Also increasing temperature leads to shift the corrosion potential to more negative values and to change the corrosion rate of more active metal (Zn) depending on two parameters oxygen solubility and oxygen diffusivity. As area fraction of more active metal (Zn) increased the galvanic potential is shifted to the negative anodic direction while the corrosion rate for more noble metal is decreased.

بسبب الاهمية التطبيقية لحماية المعدات الصناعية من التاكل الغلفاني ظهرت الحاجة لدراسة وتحليل تأثير بعض العوامل مثل درجة الحرارة وسرعة السائل ومساحة الكاثود والانود على التاكل الغلفاني في الانظمة التي تكون تحت سيطرة انتقال الكتلة(pH=7) كما في ماء البحر.تمت دراسة التاكل الغلفاني لمعدني الحديد والخارصين لمعرفة تاثير عدد رينولد (او السرعة) ودرجة الحرارة ونسبة المساحة في ظروف سيطرة انتقال الكتلة. أظهرت النتائج ان زيادة عدد رينولد يؤدي الى زيادة تأكل المعدن الفعال الانود (Zn ) بصورة رئيسية ويؤثر قليلا على المعدن الاقل فعالية (الكاثودFe) وحسب جهد التاكل الذي يعتمد على نسبة المساحة بين المعدنين. زيادة عدد رينولد يؤدي الى زيادة جهد التاكل الغلفاني بالاتجاه الموجب و زيادة درجة الحرارة تؤدي الى تقليل معدل التاكل الغلفاني وتقليل جهد التاكل الغلفاني(ازاحته بالاتجاه السالب) وازاحته بالاتجاه السالب اما زيادة مساحة المعدن الفعال (Zn) تؤدي الى تقليل الجهد الغلفاني وتقليل تاكل المعدن الاقل فعالية (Fe). ER -