@Article{, title={Experimental Investigation of Individual Evacuated Tube Heat Pipe Solar Water Heating Systems}, author={Hassan N. S. Al-Joboory and Khalid A. Joudi}, journal={Journal of Engineering مجلة الهندسة}, volume={18}, number={2}, pages={203-222}, year={2012}, abstract={The work involves outdoor experimental testing of ten individual evacuated tube heat pipe solar water heating systems with heat pipes of three diameter groups of 16, 22 and 28.5 mm. The first and third groups had evaporator lengths of 1150, 1300 and 1550 mm. The second group had an additional length of 1800 mm. all heat pipes were of fixed condenser length of 200 mm. Ethanol at 50% fill charge ratio of the evaporator volume was used as the heat pipes working fluid. Each heat pipe condenser section was inserted in a storage tank and the evaporator section inserted into an evacuated glass tube of the Owens- Illinois type. The combined heat pipe and evacuated glass tube form an active solar collector of a unique design. The resulting ten solar water heating systems were tested outdoors under the meteorological conditions of Baghdad, Iraq. Experiments were carried out with no load, intermittent and continuous load conditions. Some tests, at no load, were carried out with and without reflectors. The overall system efficiency was found to improve with load conditions by a maximum of 55%. The system employing an 1800 mm evaporator length and 22 mm heat pipe (HP7) showed the best performance by higher water temperatures, overall useful energy gain and efficiency at various load conditions. System performance was predicted theoretically using electrical analogy derived from an energy balance. An agreement of within 14% was obtained between theoretical and experimental values.

يتضمن البحث فحصا تجريبيا بالخارج لعشر منظومات تسخين مياه بالطاقة الشمسيه ذات الأنبوب الحراري في الأنبوب المفرغ تستخدم أنابيب حرارية بثلاث أقطار هي 16 و22 و28.5 ملم. تكونت مجموعتي الأنابيب ذات القطرين الأول والثالث من أنابيب بأطوال مبخر 1150 و1300 و 1550 ملم بينما شملت المجموعة الثانية طولا اضافيا هو 1800 ملم. كانت جميع الأنابيب بطول مكثف ثابت يبلغ 200 ملم. شحنت جميع الأنابيب الحراريه بالايثانول كمائع شغل بنسبة شحن بلغت 50% من حجم المبخر. تم إدخال المكثف لكل أنبوب حراري في خزان ماء وادخل المبخر في أنبوب زجاجي مفرغ من نوع أوينز- ألينويز وأصبحت الوظيفة المركبة الناتجة من ذلك تكون لاقط شمسي فعال ذو تصميم فريد. كانت المنظومات الناتجة عشرة منظومات فردية ذات أنبوب حراري في الأنبوب المفرغ لتسخين الماء بالطاقة الشمسية والتي تم فحصها تجريبيا في الظروف الجوية لمدينة بغداد. أجريت التجارب على هذه المنظومات بدون حمل وبحمل متقطع وحمل مستمر. كما أجريت بعض التجارب بدون حمل مع سطح عاكس وبدونه. وقد تحصل أفضل أداء من المنظومة ذات الأنبوب الحراري HP7 بطول مبخر 1800 ملم وقطر 22 ملم من بين المنظومات العشر والذي تمثل بدرجات حرارة ماء ساخن أعلى وتخزين طاقة حرارية كلية وكفاءة أعلى مع جميع أشكال التحميل. تبين من خلال البحث أن الكفاءة الكلية للمنظومات الشمسية تحسنت مع التحميل بمقدار أقصاه 55%. تم القيام بتحليل نظري للمنظومات الشمسية باستخدام منظومة مقاومات كهربائية مناظرة متأتية من الاتزان الحراري للمنظومة الشمسية وعند مقارنة الأداء العملي مع هذه الاستنتاجات النظرية حصل توافق جيد بحدود 14% بين القيم النظرية والقيم العملية.} }