TY - JOUR ID - TI - EXPERIMENTAL STUDY FOR A NATURAL CONVECTION HEAT TRANSFER FROM AN ISOTHERMAL HEATED RECTANGULAR PLATE دراسة عملية لانتقال الحرارة بالحمل الحر لصفيحة مستطيلة الشكل مسخنة بثبوت درجة الحرارة AU - محمد حسان جبل AU - امير عبد جدوع AU - ابتسام احمد حسن PY - 2011 VL - 17 IS - 1 SP - 1 EP - 17 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - An experimental investigation to know the effect of inclination angle (Φ), perforation ratio (m) and heating level on the rate of heat transfer by natural convection from isothermal rectangular flat plate (with and without rectangular hole) with extension surface. The experiments covered the laminar region with a range of Rayleigh number of order of 106.The experimental study included the manufacturing of four rectangular models of aluminum (125mm) length,(64mm) width and (10mm) thickness and perforation ratio (m=0.0,0.2&0.28) respectively with heater for each model, and manufacturing a device allow fine movement of the thermocouple in three dimensions above the models surface with a capability of inclination the models up to (180°) with horizon Practical Experiments achieved by using local measure method for finding the temperature gradient, thermal boundary layer thickness (δ) using thermocouples .The experiment has been done with variable inclination angle from horizon (0°, 30°, 90°, 145°&180°) and four heating level (Tw=50, 70, 90&110°C) in range of Grashof number (1.632×106≤ GrLo ≤5.973×106) for each model.The results show that the boundary layer thickness (δ) decrease while the temperature gradient increase when Grashof number and perforation ratio (m) increase. The boundary layer thickness (δ) for incline position facing upward is more than facing downward while the temperature gradient is less. The average Nusselt number increases with the increase of inclination of plates facing upward to reach to the higher average Nusselt number at vertical position then decreases with increase of inclination of plates. Also Average Nusselt number value increases with increase of perforation ratio and Grashof Number.

تم اجراء عدد من التجارب المختبرية لاجل ايجاد علاقة بين رقم نسلت ورقم رالي وكذلك لدراسة تأثير زاوية الميل (Φ) ونسبة تثقيب المساحة (mA) ومستوى التسخين في معدل انتقال الحرارة بالحمل الحر من صفائح مستطيلة ذات ثقب مستطيل مسخنة بثبوت درجة الحرارة وبوجود أسطح امتداد, وضمن منطقة الجريان الطباقي لرقم رالي (106≤Ra≤3.96×106). نتائج الدراسة بينت إن سمك الطبقة المتاخمة الحرارية (δ) يقل فيما يزداد انحدار درجات الحرارة عند زيادة رقم كراشوف ونسبة التثقيب (mA) وكذلك عند زيادة زاوية الميل وصولا للوضع العامودي.وان اكبر قيمة لمتوسط رقم نسلت سجلت عند الوضع العمودي (Φ=90º) واقل مقدارعندما يكون وجه الصفيحة الى الاسفل (Φ=180º). وتزداد أيضا قيمة رقم نسلت المتوسط بزيادة نسبة التثقيب ( mA) ورقم كراشوف.وحصل توافق جيد عند مقارنة النتائج العملية للبحث الحالي مع نتائج عملية وعددية لبحوث سابقة. ER -