TY - JOUR ID - TI - A Proposed Design for R.C Blast Resistant Barriers AU - Raad Al-Azawi AU - Thamir Al-Azawi PY - 2005 VL - 11 IS - 2 SP - 247 EP - 261 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - In this study proposed design for reinforced concert barriers in industrial units is presented. The barriers are deemed to mitigate the hazards of internal explosions to protect the surroundings. The Technical Manual (TM5-1300) for fortified structures recommends the use of lacing reinforcement barrier walls when the plastic rotation exceeds a specified limit. Such reinforcement is essential in shear design but it needs special skill and additional cost. To avoid using lacing reinforcement, walls of grillage system is proposed in this study to reduce the plastic rotation of the panels. The Panels are designed to respond plastically, while the grillage members respond elastically. This advantageous from recruiting point of view since only the blast – damaged panels may be repaired.Results have showing that the (SDOF) analysis method as recommended by the (TM5-1300) [D.C., 1992] gives an upper bound solution as compared with the (F.E) method. Cubicles of ribbed walls show higher blast resistance and exhibits smaller plastic support rotation of panels than that of flat-sided walls. The minimum thickness required to avoid using lacing reinforcement have been obtained for different cases of grillage arrangements and charge weights.

في هذا البحث تم اقتراح تصميم لجدران خرسانيه مسلحة لاستخدامها داخل المعامل لغرض الحماية من خطر الانفجارات الداخلية المحتملة, ولغرض تماشي استخدام التسليح المتعرج تم اقتراح نظام شبكي لتقليل الدوران اللدن عند المساند وتصميم اجزاء الجدار بين اعضاء الشبكة بشكل لدن وباقي الاعضاء بشكل مرن.وهذا من شأنه ان يسهل الصيانة عند تعرض المنظومه للانفجار . اذا ان اعضاء الشبكة الرئيسيه ستبقى ضمن حدود المرونة.اظهرت النتائج ان طريقة التحليل الديناميكي احادي الحركه تعطي نتائج اعلى من طريقة العناصر المحدده وتم ايجاد اقل سمك للجدران يسمح بعدم استخدام التسليح المتعرج ولحالات مختلفة لشدة الانفجار. ER -