TY - JOUR ID - TI - Effect of Solid Properties on Axial Liquid Dispersion in Bubble Column تأثير خواص الصلب على التشتت الطولي للسوائل في ابراج التفقيع AU - Ali Raad Mohammed Jawad علي رعد محمد PY - 2012 VL - 8 IS - 1 SP - 37 EP - 47 JO - Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية SN - 18181171 23120789 AB - Experiments were conducted to study axial liquid dispersion coefficient in slurry bubble column of 0.15 m inside diameter and 1.6 m height using perforated plate gas distributor of 54 holes of a size equal to 1 mm diameter and with a 0.24 free area of holes to the cross sectional area of the column. The three phase system consists of air, water and PVC used as the solid phase. The effect of solid loading (0, 30 and 60 kg/m3) and solid diameter (0.7, 1.5 and 3 mm) on the axial liquid dispersion coefficient at different axial location (25, 50 and 75 cm) and superficial gas velocity covered homogeneous-heterogeneous flow regime (1-10 cm/s) were studied in the present work. The results show that the axial liquid dispersion coefficient increases with increasing superficial gas velocity, axial distance, solid concentration and an inverse relationship with particles diameter

اجريت التجارب العملية لدراسة معامل التشتت الطولي في ابراج التفقيع (للسوائل العالقة) ذو قطر داخلي 0.15م وارتفاع 1.6م بأستخدام صفيحة مثقبة لتوزيع الهواء تحوي على 54 فتحة بقطر 1ملم مع 0.24 نسبة مساحة حرة للفتحات الى المساحة المقطعية. بأستخدام نظام ثلاثي متكون من الهواء – الماء – الصلب (بولي فينيل كلورايد). أستخدمت تراكيز مختلفة من المادة الصلبة (0 , 30، 60 كغم / م3) واقطار للصلب (0.7 ، 1.5 ، 3 ملم) لدراسة تأثيرها على معامل التشتت الطولي وابعاد طولية مختلفة (25 ، 50 ، 75 سم) وسرعة غاز (1 – 10 سم/ثا) لتغطي المنطقة المتجانسة والغير متجانسة. اظهرت النتائج زيادة معامل التشتت الطولي للسائل مع ازدياد سرعة الغاز والبعد الطولي وتركيز الصلب ونقصان المعامل مع قطر الصلب ER -