@Article{, title={A Green Synthesis of Iron/Copper Nanoparticles as a Catalytic of Fenton-like Reactions for Removal of Orange G Dye التخليق الأخضر للجسيمات النانوية حديد/نحاس كمحفزات في التفاعلات الشبيهة بالفنتون لغرض إزالة الصبغة البرتقالية G}, author={Ahmed K Hassan and Mohammed A Atiya and Imad M Luaibi}, journal={Baghdad Science Journal مجلة بغداد للعلوم}, volume={19}, number={6}, pages={1249-1264}, year={2022}, abstract={This research paper studies the use of an environmentally and not expensive method to degrade Orange G dye (OG) from the aqueous solution, where the extract of ficus leaves has been used to fabricate the green bimetallic iron/copper nanoparticles (G-Fe/Cu-NPs). The fabricated G Fe/Cu-NPs were characterized utilizing scanning electron microscopy, BET, atomic force microscopy, energy dispersive spectroscopy, Fourier-transform infrared spectroscopy and zeta potential. The rounded and shaped as like spherical nanoparticles were found for G-Fe/Cu NPs with the size ranged 32-59 nm and the surface area was 4.452 m2/g. Then the resultant nanoparticles were utilized as a Fenton-like oxidation catalyst. The degradation efficiency of OG dye highly depends on H2O2 concentration (1.7-5.28 mM), catalyst dose (0.4-1.6 g/L), pH (2-7), initial OG concentration (25-75 mg/L), and temperature (20-50 ℃). Batch experiments showed that 94.8 % of 50 mg/L of OG dye was removed within the optimum peroxide concentration, dose, pH and temperature which were 3.52 mM, 1 g/L, 3, and 40℃ respectively along with 30 min contact time. The results of kinetic models showed that OG removal followed the second-order model. Finally, the thermodynamic study of reaction was also examined and concluded to endothermic reaction with 29.725 kJ/mol activation energy.

تدرس هذه الورقة البحثية استخدام طريقة صديقة للبيئة وغير مكلفة لإزالة الصبغة البرتقالية G (OG) من المحلول المائي، حيث تم استخدام مستخلص أوراق شجرة الفيكس لغرض التخليق الأخضر لجسيمات الحديد/نحاس ثنائية الفلز النانوية (G-Fe/Cu-NPs). بعد أن تم تحضير G-Fe/Cu-NPs تم تشخيصها باستخدام مجهر الماسح الالكتروني، BET، مجهر القوة الذرية، مطياف الطاقة المشتتة، مطيافية الأشعة تحت الحمراء، و مقياس زيتا. أظهرت نتائج التشخيص بأن شكل G-Fe/Cu-NPs كان مستدير شبه كروي ويتراوح الحجم بين 32-59 نانومتر بينما كانت مساحتها السطحية 4.452 م2/غم. فيما بعد اُستخدمت الجسيمات النانوية الناتجة كعامل مساعد في تفاعلات الأكسدة الشبيهة بالفنتون. حيث أن كفاءة تحلل صبغة OG اعتمدت بشكل كبير على تركيز الهيدروجين بيروكسايد (1.7-5.28 ملي مولاري)، كمية العامل المساعد (0.4-1.6 غم/لتر)، درجة الحامضية (2-7)، تركيز OG الابتدائي (25-75 ملغم/لتر) ودرجة الحرارة (20-50 درجة مئوية). أظهرت التجارب الدفعية أن 94.8% لتركيز 50 ملغم/لتر من صبغة OG تمت ازالته عند الظروف المثلى للهيديروجين بيروكسايد، كمية العامل المساعد، درجة الحامضية، ودرجة الحرارة والتي كانت 3.52 ملي مولاري،1غم/لتر، 3، و 40 درجة مئوية على التوالي خلال زمن مقداره 30 دقيقة. أيضاً أظهرت نتائج دراسة النماذج الحركية بأن ازالة صبغة OG تتبع نموذج حركي من الدرجة الثانية. أخيراً، تم دراسة الديناميكية الحرارية للتفاعل وخلُصت إلى ان التفاعل ماصاً للحرارة وله طاقة تنشيط مقدارها 29.725 كيلوجول/مول.} }