TY - JOUR ID - TI - Study on Improvement of Casting Conditions for Some Aluminum Bronze Alloys دراسة تحسين ظروف السباكة لبعض سبائك برونز الالمنيوم AU - Sami A. Ajeel AU - Ahmed N. Ibrahiem AU - Abdul Salam A. Fadhil PY - 2007 VL - 25 IS - 6 SP - 711 EP - 727 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - Two types of aluminium bronze alloys have been studied to determine theproper methods of melting and casting in two different conditions; with treatingmaterials as (Albral 2, Logas 50 and deoxidizing tube E3) and without anddetermine the effects of these conditions on mechanical properties of alloys.These alloys are :-a) Aluminium bronze alloys (AB1).b) Nickel-aluminium bronze alloys (AB2).These alloys were produced using different melting processes and cast method.The first one was made by preparing the charge materials to be melted andthen, to the cast process without using any types of additions and treatmentmaterials. The second one was made with casting conditional control, usingproper techniques of casting and using protective layers to minimize theoxidation and other casting defects. The molten metals from both processeswere poured into two types of moulds; sand and metal moulds, both types werein dimensions (Ø100×250) mm.The final products of each type of alloys in each type of conditions were used toperform many types of inspections; chemical analysis, visual test, structureexaminations, hardness test and tensile test.The results of all processes and inspections show that the properties of alloyswhich were treated and cast in metal moulds were better than that cast in sandmoulds. These alloy castings are free from shrinkage cavities, inclusions andporosities due to using suitable sequence in alloy contents melting, no overheat,reducing the melting time, selecting non-turbulence casting method and suitableselection of pouring temperatures. The mechanical properties (hardness andultimate tensile strength) for treated nickel-aluminium bronze alloys (T-AB2)were better than that for other alloys.

تتضمن الدراسة إنتاج نوع ين من سبائك برونز الألمنيوم لتحديد الطرق المناسبة للصهرAlbral 2, Logas والصب وبظرفين مختلفين؛ باستخدام مواد المعالجة مثل ( 50وبدونها وايجاد تأثير تلك الظروف في خواص تلك السبائك. وهذه (deoxidizing tube E و 3السبائك هي:-712. (AB أ. سبائك برونز الألمنيوم-( 1.(AB ب. سبائك برونز النيكل-ألمنيوم -( 2تضمن الإنتاج لهذه السبائك استخدام عمليات صهر وطرق سباكة مختلفة.أنتج النوع الأول ابتداءآ من تحضير المواد إلى عملية الصهر ومن ثم إلى عمل ية الصب بدوناستخدام أي نوع من الإضافات ومواد المعالجة . وأنتج النوع الثاني بالسيطرة على ظروفالسباكة، استخدام الأساليب المناسبة للسباكة واستخدام وسائل حماية من الأكسدة وعيوبالسباكة الأخرى.إن المواد المنصهرة من كلا العمليتين أعلاه صبت في نوعين من القوالب؛ رملية ومعدنيةملم. (Ø100× وبالأبعاد ( 250المنتجات النهائية لكل نوع من السبائك ولكل نوع من الظروف استخدمت لتحضير نماذج عدةأنواع من الفحوصات؛ التحليل الكيمياوي، الفحص العياني ، فحص الترك يب الداخلي ، اختبارالصلادة واختبار مقاومة الشد.النتائج لكل الفحوصات وا لعمليات أظهرت أن خواص السبائك التي تم معالجتها وصبها فيالقوالب المعدنية كانت أفضل من تلك التي في القوالب الرملية . المسبوكات الناتجة كانت خاليةمن فجوات التقلص، المسامات والمتضمنات نتيجة استخدام التسلسل المناسب في صهرمكونات السبيكة، بدون إفراط في التسخين، تقليل زمن الصهر، اختيار طريقة السباكة الغيرمضطربة والاختيار المناسب لدرجات حرارة الصب . أما الخواص الميكانيكية (الصلادة ومتانةالشد القصوى) لسبيكة برونز النيكل-ألمنيوم المعالجة كانت أفضل مما للسبائك الأخرى. ER -