TY - JOUR ID - TI - The Influence Of Bonding Mode and Wire Setting On The Stresses Of Metal Matrix Composite Reinforced with Continuous wire AU - Basim. Mohammed Fadhel PY - 2008 VL - 26 IS - 2 SP - 139 EP - 145 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - This paper deals with the influence of bonding mode and the setting of thereinforcement between matrix and reinforcement for metal matrix composite on theinduced stresse and also on the value of the reinforcing A charpy specimen withnotch was used as a specimen test for comparison . Analytical model was builtvia ANSYS 8.1 software with a nonlinear solution based on the elastic –plasticbehavior for both phases (matrix and reinforcement).Five miscellaneous cases forbonding mode and the setting of the reinforcement (wire with 1 mm diameter)were used .The results exhibit the eloquent perfect bonding on the value ofreinforcing and also the setting (semi-circle) of the reinforcement in the matrixwhich gave the best reinforcing.

تناول هذا البحث دراسة تاثيري اسلوب الالتصاق ووضعية مادة التقوية بين المادة الاساس ومادة التقوية لمادةمتراكبةعلى الاجهادات المتولدة وكذلك مقدارالتقوية داخل المادة المتراكبة تم اعتماد عينة جاربي القياسية ذات الحزالمتطور ANSYS لاختبار الصدمة كعينة اختبار.تم بناء لهذا الغرض الانموذج التحليلي باستخدام برنامج 8.1وباسلوب الحل الغير خطي مع اعتماد سلوك المادة المرن اللدن لكلا الطورين ( مادة التقوية والمادة الاساس).تم استخدامخمس حالات متنوعة لاسلوب الالتصاق ووضعية مادة التقوية (سلك نحيف بقطر 1ملم)وقد اظهرت النتائج التاثيرالبالغ لاسلوب اللصق المثالي على مقدار التقوية كذلك وضعية الدائرة الناقصة لمادة التقوية (السلك) داخل المادةالاساس حيث اعطت افضل تقوية. ER -