TY - JOUR ID - TI - A Study of the Effect of Semi-Angle of Cone on the Vibration Characteristics of Cylindrical-Conical Coupled Shell Structure AU - Muhsin J. Jweeg AU - Adnan D. Mohammed AU - Mohsin A. Al-Shamari PY - 2012 VL - 18 IS - 5 SP - 651 EP - 660 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - In this work, the effect of variation of semi-angle of the conical part on the vibration characteristics of cylindrical-conical coupled structure is investigated. The shell is made of polyester resin reinforced by continuous E-glass fibers. The case is analyzed experimentally and numerically for orthotropic shell structures. The experimental program is conducted by exciting the fabricated structure by an impact hammer and monitoring the response using an attached accelerometer for different semi-angles of the conical part. Software named SIGVIEW is used to perform the signal processing on the acquired signal in order to measure the natural frequencies and the corresponding mode shapes. The numerical investigation is achieved using ANSYS (Finite Element software) which was verified by the experimental results. Good agreement is achieved when comparing the experimental and numerical results. The maximum deviation in results was found to be (5.9%). The maximum relative nodal rotational and translational amplitudes associated with the first normal mode of the orthotropic and isotropic shells are noted for the structure of semi-angle of cone of 45o.

في هذا العمل أجريت دراسة تجريبية وعددية لتأثير تغير نصف زاوية المخروط على الخواص الأهتزازية للهيكل القشري المخروطي – الأسطواني المرتبط المختلف والسوي. لقد تم تصنيع الهيكل القشري من مادة البولستر الرابطة المقواة بكمية من الألياف الزجاجية نوع E المستمرة. انجز الجانب العملي لحساب الترددات الطبيعية للهيكل باستخدام محلل FFT بمساعدة مقياس التعجيل ومطرقة مزودة بمتحسس قياس القوة. لقد تم انجاز الجانب العددي باستخدام طريقة العناصر المحددة (برنامج Ansys). لقد تم الحصول على تطابق جيد عند مقارنة النتائج العددية والعملية لقيم التردد الطبيعي الاول للهيكل.ان قيمة الأنحراف القصوى بالنتائج هي (5.9%). لقد تم التوصل الى ان القيم النسبية العظمى للعقد للسعات الانتقالية والدورانية الخاصة بشكل النسق الاول وللهياكل المصنعة من مواد مركبة مختلفة او سوية تحصل عند زاوية نصف زاوية مخروط مقدارها 45 درجة. ER -