TY - JOUR ID - TI - Experimental Study into Effect of Developing Section Length on The Heat Transfer Process in a Horizontal Annulus دراسة عميلة لتأثير طول مقطع التشكيل على عملية أنتقال الحرارة بتجويف حلقي أفقي AU - Dr. Akeel A. Mohammed د.عقيل عبد الله محمد AU - Ameer A. Jadoaa, م.م أمير عبد جدوع PY - 2011 VL - 19 IS - 6 SP - 62 EP - 72 JO - AL-Rafidain Engineering Journal (AREJ) مجلة هندسة الرافدين SN - 18130526 22201270 AB - ABSTRACTAn experimental investigation has been presented to study the heat transfer process in thermally developed region of horizontal concentric annulus with an adiabatic inner tube and uniformly heated outer tube. Three lengths of entrance section have been used to achieve the hydrodynamically fully developed flow before test section with (L/Dh=50,75 and 100). The study has covered the range of Reynolds number (450≤ Re≤2000) and Richarson number (0.1≤ Ri≤ 0.7). Results show that the heat transfer process in the lower part of annulus is better than that in the upper part; and the vortex strength increases as Rayligh and Rynolds numbers increase. An empirical correlation for the average Nusselt number as a function of Rayliegh and Reynolds numbers and L/Dh has been deduced and compared with available literatures to give the same trend and behavior.

الخلاصة:تم أجراء تجارب عملية لدراسة عملية أنتقال الحرارة بمنطقة التشكيل الحراري لتجويف حلقي متمركز بأنبوب داخلي معزول وانبوب خارجي مسخن تسخين منتظم.أستخدمت ثلاث اطوال لمقاطع الدخول للحصول على جريان تام التشكيل الهيدرديناميكي (L/Dh=50,75 and 100) .غطت الدراسة مدى رقم Re (450 ≤ Re ≤ 2000) ورقم Ri (0.1 ≤ Ri ≤ 0.7). بينت النتائج بأن عملية أنتقال الحرارة بالجزء السفلي للتجويف الحلقي أفضل من الجزء العلوي, ومقاومة الدوامة يزداد بزيادة رقم Ra ورقم Re. تم أستنباط معادلة تجريبية لمعدل رقم Nu كدالة لرقم Re ورقم Ra وقيمة(L/Dh)cal. لمقطع المخمد وقورنت مع الادبيات السابقة لتعطي نفس السلوك والمنحى. ER -