TY - JOUR ID - TI - Measurement and Analysis of Bubble Size Distribution in the Electrochemical Stirred Tank Reactor قياس و تحليل توزيع حجم الفقاعات في مفاعل الخزان الكهروكيميائي AU - Raghad S. Mahmood رغد ساجد محمود AU - Alanood A. Alsarayreh العنود الصرايرة AU - Ammar S. Abbas عمار صالح عباس PY - 2023 VL - 24 IS - 1 SP - 27 EP - 31 JO - Iraqi Journal of Chemical and Petroleum Engineering المجلة العراقية للهندسة الكيمياوية وهندسة النفط SN - 19974884 26180707 AB - The dimensions of bubbles were measured in a stirrer tank electrochemical reactor, where the analysis of the bubble size distribution has a substantial impact on the flow dynamics. The high-speed camera and image processing methods were used to obtain a reliable photo. The influence of varied air flow rates (0.3; 0.5; 1 l/min) on BSD was thoroughly investigated. Two types of distributors (cubic and circular) were examined, and the impact of various airflow rates on BSD was investigated in detail. The results showed that the bubbles for the two distributors were between 0.5 and 4.5 mm. For both distributors at each airflow, the Sauter mean diameter for the bubbles was calculated. According to the results, as the flow rate raised, the bubble size for cubic distributors increased from 2.35 to 2.41 mm and for circular distributors from 2.76 to 2.88 mm.

يتم قياس أبعاد الفقاعات في مفاعل كهروكيميائ مستمر، حيث يكون لتحليل توزيع حجم الفقاعة تأثير كبير على ديناميكيات التدفق. تم استخدام كاميرا عالية السرعة و تقنيات معالجة الصور للحصول على صورة موثوقة. تم اختبار نوعين من الموزعات (مكعب و دائري)، و دُرست تأثير معدلات تدفق الهواء المختلفة (0.3، ، 1 لتر / دقيقة) على توزيع حجم الفقاعة بالتفصيل. تظهر النتائج أن حجم الفقاعات يتراوح بين 0.5 إلى 4.5 ملم للموزعين. تم حساب متوسط قطر الفقاعات لكلا الموزعين عند كل تدفق هواء. أشارت النتائج إلى زيادة حجم الفقاعة من 2.35 إلى 2.41 مم للموزع المكعب ومن 2.76 إلى 2.88 مم للموزع الدائري عند زيادة معدل التدفق. ER -