TY - JOUR ID - TI - The Determination of Optimum Conditions for Anodizing Aluminum Alloy (6063) AU - Uday Sami Mohammad AU - Sami A.Ajeel PY - 2008 VL - 26 IS - 11 SP - 1341 EP - 1354 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - Aluminum alloy (6063) has been anodized using sulfuric acid as anelectrolyte. To study the characteristic of the anodic film, four variables, wereconsidered as the most dominant variables. These variables are: current density in therange of 1- 4 A/dm2, electrolyte concentration in the range of 6 - 20 vol.%, electrolytetemperature in the range of 10- 30oC and anodizing time between 12- 60 min.These four variables are manipulated through the experimental work using Box –Wilson experimental design where second order polynomial model was proposed tocorrelate the studied variables with the thickness of anodic film of aluminum alloy(6063) to estimate the coefficients of the proposed polynomial adopted via statisticasoftware.The predicated models are found after statistically analyzing the significance asfollows:Y= 27.7800 + 8.0737X1 - 0.8037X3 + 8.2078X4 - 0.6994X21 - 0.8882X22- 1.5582X23 - 1.1231X1X2 + 2.6225X1X4 - 1.7931X2X3 - 1.6956X2X4- 1.0581X3X4where Y is the objective function (thickness of anodic film), X1 is the current density;X2 is the electrolyte concentration; X3 is the temperature of electrolyte and X4 is theanodizing time.The study shows that the anodizing time and current density had shown positivedependence of great significance on the anodic film thickness while the other twostudied variables (i.e. concentration and temperature of electrolyte) had shown smalldependence on the film thickness of aluminum alloy (6063).Optimum conditions for achieving the maximum film thickness are obtained fromoptimizing the above correlation and are found as follow: 4 A /dm2 Currentdensity, 6 vol. % Acid concentration, 19.5 oC Electrolyte temperature and 60 min.time of anodizing.

يتضمن البحث دراسة أنودة سبيكة الألمنيوم ( 6063 ) باستخدام حامض الكبريتيك كمحلولألكتروليتي . لغرض دراسة خصائص طبقة الانودة لسبيكة الألمنيوم ( 6063 ) أُخذت بنظر الأعتبارأربع متغيرات أعتبرت الأكثر تأثيرًا على عملية الأنودة.لربط المتغيرات أعلاه بمعادلة من ( Box- Wilson) لتصميم التجارب العملية تم استخدام طريقة. ( الدرجة الثانية تشير الى العلاقة بين المتغيرات الأربعة وسمك طبقة الانودة لسبيكة الألمنيوم( 6063من خلال أيجاد المعادلات متعددة الحدود المقترحة والمعتمدة في البرنامج الإحصائيلوحظ بأن النماذج المستنبطة بعد التحليل الإحصائي للعوامل الموثرة كان كما يلي : ( StatisticaY= 27.7800 + 8.0737X1 - 0.8037X3 + 8.2078X4 - 0.6994X21 - 0.8882X22-1.5582X23 - 1.1231X1X2 + 2.6225X1X4 - 1.7931X2X3 - 1.6956X2X4تمثل تركيز المحلول X تمثل كثافة التيار, 2 X تمثل الدالة لسمك طبقة الأنودة, 1 Y حيث أنتمثل زمن الأنودة. X تمثل درجة حرارة المحلول و 4 X الألكتروليتي, 3توضح الدراسة بأن زمن الأنودة وكثافة التيار لها تأثير أيجابي عالي على سمك طبقة الأنودةلسبيكة الألمنيوم( 6063 ) في حين أن المتغيران الآخران (التركيز ودرجة الحرارة) كان لها تأثيرمحدود على سمك الطبقة. تم أستخراج أفضل ظروف لتنفيذ التجارب من خلال تطبيق المعادلةالتجريبية للحصول على أعلى قيمة لسمك الطبقة وهذه الظروف موضحة أدناه: كثافة التيار 4.60 min. 19.5 وزمن الانودة C° 6, درجة الحرارة vol.% تركيز المحلول ,A/dm2 ER -