TY - JOUR ID - TI - Microstructural Characterization of Electroformed Nickel and Its Composites خصاص التركيب الدقيق للنيكل المشكل كهربائيا مع متراكبات AU - Sabah S. Abdulnoor AU - Mofeed A. L. Jaleel PY - 2010 VL - 28 IS - 5 SP - 908 EP - 917 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - In the present work the nickel metal matrix was developed by electrochemicalforming technique, were the nickel matrix is built around the reinforced carbonfiber in various thicknesses and fiber volume fractions. The metallographicanalysis indicate that the experimental depositing condition have a dominatingeffect on the observed composite microstructure. The grain size of the depositednickel is found (from the microstructure) to vary inversely with the amount of thedepositing electrical current density. Also the temperature of the solution seem toreflect quite well on the microstructure of the metal matrix, were relatively highand low solution temperature produced rather refined grain structure, while anintermediate temperature of (50°C) is found to deposited courser grain size.Secondary thermal and mechanical treatments are found to modify themicrostructure in a way that higher annealing temperatures tend to enhanced thegrain growth process and tend to reduced apparent porosity at (650°C), similarlythe forging of the electroformed composites made at different temperature tend toreduced the internal porosity, by a notable ratio, depending on the temperature ofthe forging process.

في هذا العمل تم تطوير وسط النيكل المعدني باستخدام تقنية التشكيل الكهروكيمياوي, اذ تمبناء وسط النيكل حول الياف الكاربون التي استخدمت كمواد تدعيم, باسماك مختلفه و بكسورحجميه مختلفه. اظهرت التحليلات المجهريه ان لشروط الترسيب التجريبيه تاثير بارز علىالتركيب الدقيق للمتراكبات. فقد وجد ان الحجم الحبيبي للنيكل المرسب (من التركيب الدقيق )تتغير عكسيا مع مقدار كثافة التيار الكهربائي للترسيب. كذالك فان لدرجة حرارة محلولاذ ان ,(matrix) الترسيب تاثير ينعكس بصور واضحه على التركيب الدقيق للاساس المعدنيالترسيب عند درجات حراره المحلول المرتفعه و المنخفضه نسبيا ينتج عنها تركيب حبيبي ناعم,50° ) ينتج عنه حجوم حبيبيه كبيره. C) بينما الترسيب عند درجة حراره متوسطةكما وجد ان للمعاملات الثرمو ميكانيكيه اثر في تغير التركيب الدقيق بطريقه اسهمت في650° ), و بالمثل فان عملية الطرق التي اجريت C) خفض نسبه المسامات عند درجة حرارةعند درجات حراريه مختلفه على المتراكبات المشكله كهربائيا تميل الى خفض نسبه المساماتبنسب ملحوضه اعتمادا على درجة حرارة عملية الطرق. ER -