@Article{, title={Isothermal Oxidation of Simple and Pt-Modified Diffusion Coating on Inconel Alloy 600 In Water Vapor اكسدة سبائك الانكونيل – بلاتينيوم – الالمنيوم تحت ظروف بخار الماء}, author={Al- Hatab, Khalil and Al- Alqawie, Hussein and Moosa, Ahmed Ali}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={27}, number={2}, pages={288-299}, year={2009}, abstract={In this work the oxidation behavior of both inconel alloy 600 and coated system(Pt-modified aluminide coating) was investigated in pure water vapor H2O in thetemperature range 700 - 900 ºC. The platinum was deposited by electrochemicalmethod. Pt-modified aluminide coating was applied to inconel alloy 600 by using singlestephigh activity pack cementation method. The weight gain measurements indicatethat the oxidation kinetic is parabolic for uncoated and coated alloy. At temperaturesbelow 900 ºC the inconel alloy 600 is less aggravated in water vapor environmentsbecause it is a chromia former alloy. At 700 ºC, water vapor does not have a significanteffect on the spalling of oxide scales. At 900 ºC, water vapor causes spalling of theoxide scales during isothermal oxidation of inconel alloy 600. Therefore, it is concludedthat this alloy should not be used above 900 ºC in water vapor environments. Largevoids were found at the oxide scales-substrate interface and at grains or at grainboundaries due to the chromium outward diffusion toward the oxide scales.At 900 ºC, the parabolic rate constant (kp) of the coated system was one order ofmagnitude lower than that for the uncoated alloy. It was concluded that, water vaporexhibit little effect on the Pt-modified aluminide coating. Oxide phases that formed oncoated system are: Al2O3, NiAl2O4, Cr2O3, and NiFe2O4.

ذات (inconel سبيكة انكونل 600 ) Superalloys تم دراسة سلوك الأكسدة للسبائك الفائقة المؤلف من Coating System بالاضافة الى سلوك التأكسد لنظام الطلاء Ni الأساس من النيكل تم ترسيبها بتقنية Pt –Layer و طبقة من البلاتين substrate سبيكة الانكونل 600 كأساس ثم عوملت بالانتشار الحراري ليتم أخيرا ترسيب الألومنيوم Electrochemical الطلاء الكهروكيميائي تم دراسة سلوك الأكسدة . Pack Cementation Technique عليها باستخدام تقنية الطلاء بالسمنتةتشير نتائج .º 700 م - عند درجات حرارة هي 900 ، H2O للأنظمة أعلاه في وسط و بخار الماء الدراسة الحالية الى أن السلوك الكيناتيكي العام للتأكسد لسبيكة الانكونل 600 (الغير المطلية والمطلية) وجد أن بخار الماء ليس ،º عند درجة حرارة 700 م . Parabolic kP يتبع تقريبا قانون القطع المكافئيشير ذلك الى صعوبة استخدام هذه º له تأثير يذكر على تشظية الأكاسيد . عند درجة حرارة 900 م .º السبيكة في هذه الأوساط في درجة حرارة أعلى من 900 مللسبيكة المطلية اقل بمرتبة عشرية واحدة º عند درجة حرارة 900 م kp أن قيمة ثابت معدل التأكسد للسبيكة غير المطلية . تشير النتائج الى تكون فجوات كبيرة عند kp من قيمة ثابت معدل التأكسد طبقة ألاوكسيد/ الارضية وذلك بسبب عملية الانتشار لعناصر السبيكة كالكروم. تشير نتائج التحليلبالأشعة السينية للسبيكة المطلية ظهور أكاسيد الكروم و النيكل اضافة الى أكسيد الألومنيوم كما يلي .NiAl2O4, Cr2O3 , Al2O3 ,NiFe2O4} }