@Article{, title={Studing Of Some Phisical Properties And Morphology Of Blends Of Hdpe /Lldpe After And Before Exposure To Uv Light دراسة بعض الخواص الفيزياوية والبنية الشكلية لممزوجات HDPE/LLDPE قبل وبعد التعريض للاشعة الفوق بنفسجية}, author={Weam A. Abed and Nabeela A. Mohammed and Najat J. Saleh}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={27}, number={4}, pages={820-830}, year={2009}, abstract={Products made of polyethylene used out doors are subjected to UV-degradation. Infact, many polymers show changes in physical properties during service lifetime, whenthey are exposed to sun light and particularity to UV-light. In the present work, thephysical properties and the morphology of blends of high – density polyethylene(HDPE)/linear-low-density polyethylene (LLDPE) studied before and after exposure toUV –light.HDPE was mixed with different weight percent (0, 15, 30, and 45%) of LLDPE usingthe two roll mills; the mixing machine is operated at a temperature of 135 oC.Weathering test was carried out to find the effect of the environment condition on thephysical properties of the polymeric materials by increasing the exposure times to(100,200,300) hr. The physical properties and the morphology were specified bymeasuring the (absorption properties, and densities), for the former, andphotomicrograph for the latter. The results obtained in this work show that the density ofpure HDPE and HDPE/LLDPE blends increased with the increasing the exposure time,and that immersing the HDPE and HDPE/LLDPE blends in water can produce a varietyof damage and this damage increased with the increasing of the exposure times also, asthe amount of LLDPE is increased in the HDPE/LLDPE blends the amount of waterabsorbed and diffusivity coefficient, increase greatly, and from the optical micrographresults showed clearly the damage obtained due to exposure to UV light for 300 hr forpure HDPE and HDPE/LLDPE blends.

ان المنتجات المصنوعه من ماده البولي اثيلين والتي تستخدم في الهواء الطلق او العراء تتعرض ألى ألانحلاال نتيجه تعرضها للأشعه الفوق بنفسجيه .ألعديد من ألبوليمرات تشهد تغيرا ً واضحا فًي خواصها الفيزياويه مع مرور الوقت وذلك نتيجه ألتعرض الى أشعه ألشمس وبصوره خاصه ألى ألأشعه فوق ألبنفسجيه.في البحث الحالي تم دراسه ألخواص ألفيزياويه وكذلك دراسه ألبنيه أو ألشكل لممزوجات من قبل وبعد (LLDPE) بولي أثيلين واطىء ألكثافه ألخطي /(HDPE) ألبولي أثيل ين عالي ألكثافه تعريضها ألى ألأشعه فوق ألبنفسجيه .في بحثنا ألحالي تم مزج ألبولي أثيلين عالي ألكثافه مع نسب وزنيهمن ألبولي أثيلين واطىء ألكثافه ألخطي ( 45,30,15,0 ٪) وذلك باستخدام ألاسطوانات ألمدلفنه.تم اجراء فحص التجويه وذلك لأايجاد تأثير الضروف الجويه على المخاليط البوليمريه وذلك 200 , و 300 ) ساعة.الصفات الفيزياويه والبنيه الشكليه تم تعيينها وذلك , بزياده زمن التعريض ( 100 بقياس (الكثافه وخواص الامتصاصيه ) وعن طريق التصوير المجهري .النتائج تم الحصول عليه ا فيتزداد بزياده زمن HDPE/LLDPE هذه الدراسه توضح بأن كثافه ألبولي أثيلين ألنقي وممزوجات التعريض للأشعه فوق بنفسجيه , وكذلك عمليه غمس النماذج في الماء قد أدى ألىاحداث أضرار مختلفه وهذه الاضرار تزداد بزياده زمن التعريض ,وبزياده النسبه الوزنيه للبولي أثيلين و اطىء ألكثافه ألخطي تزداد كميه الماء الممتصه وكذلك يزداد معامل الامتصاصيه بصوره , HDPE/LLDPE في ممزوجاتكبيره ,ومن نتائج التصوير المجهري يتضح جليا ً مقدار الاذى الحاصل في المواد البوليمريه المحضره نتيجه تعرضها للأشعه ألفوق بنفسجيه ولحوالي 300 ساعه.} }