@Article{, title={ELASTIC- PLASTIC ANALYSIS FOR SQUARE SHELL TUBES DURING PURE BENDING USING FINITE ELEMENT التحليل المرن –اللدن للانابيب القشرية المربعة عند تعرضها للانحناء باستخدام العناصر المحددة}, author={Eklas Edan Kader اخلاص عيدان قادر}, journal={DIYALA JOURNAL OF ENGINEERING SCIENCES مجلة ديالى للعلوم الهندسية}, volume={4}, number={1}, pages={12-29}, year={2011}, abstract={ABSTRACT :- An analytical model with sufficiently non linear kinematics to capture the development in engineering applications to resist bending stress for thin walled elastic-plastic steel tubes which used as structural members. The results indicate that collapse of such tubes is imperfection sensitive for tubes with height to thickness ratio (h/t), but the sensitivity decreases as the ratio decreases. Experimentally, the tubes collapse due a limit moment instability which is followed by the formation of a kink on the compression flange of the tubes. The present research removes the limitation in the pre- bifurcation analysis and concentrates on the numerical prediction ANSYS -11 program of the response with stress and strain distribution on thin walled tubes of square cross section. The numerical, analytical and experimental results are converges to each other, by simulating the response of square tubes subjected to static and dynamic axial bending loading .The finite element models used for this work are featured by the geo-metric and material characteristics of square tubes and comparison of the computed bending response to the results and findings of the experimental works shows that the finite element models described here, approached the actual bending response of the square tubes to a satisfactory degree both in terms of collapse modes and main bending characteristics such as bending stress and strain and deformation displacement.Keywords:- Finite element model, square shell, bending.

الخلاصه في هذه الدراسة تم ايجاد نموذج تحليلي لغرض الحصول على الخواص الغيرخطية الكينيماتيكية لمواكبة التطور في التطبيقات الهندسية ولغرض مقاومة الاجهاد الانحنائي لانابيب قشرية الجدران في الحالة المرنة واللدنة لاستعمالها في الهياكل الانشائية .اوضحت النتائج ان الانهيار في مثل هذه الانشاءات ناتج عن الحساسية لوجود الشوا ئب (ذات ارتفاع الى سمك معين ) ‘حيث تقل الحساسية بنقصان هذه النسبة .عمليا تفشل الانابيب نتيجة عدم الاستقرار في حدود العزم والتي يتبعها تكون انبعاجات في الجانب الضغطي للانابيب. يزيل البحث الحالي التحديدات التي تعيق التحليل ويركز على التنبؤ العددي بواسطة برنامج حاسوبي ( Ansys.11) لمعرفة الاستجابة مع توزيع الاجهادات والانفعالات. اقترنت النتائج العملية والتحليلية والعددية مع بعضها عند مقارنة استجابة الانابيب المربعة الشكل ذات الجدران القشرية التي يسلط عليها احمال انحنائية مستقرة ومتغيرة ,ان النماذج التي طورت لهذا العمل اظهرت خواص المادة وتركيبها وعند المقارنة تبين ان النتائج العملية والنتائج المقروءة من ( ( F.E.M. تتقارب مع بعضها البعض بدرجة مقبولة جدا من حيث طور الانهيار وخواص الانحناء من اجهاد وانفعال ومقدار المسافة للتشوية .} }