TY - JOUR ID - TI - PUNCHING SHEAR AND FLEXURAL STRENGTHS OF SELF COMPACTED CONCRETE NON-RECTANGULAR SHAPED FLAT PLATE SLABS تحليل مقاومة القص الثاقب ومقاومة الانثناء للبلاطات الصفائحية الخرسانية ذاتية الرص ذات الاشكال غير المستطيلة AU - Ali H. Aziz علي حميد عزيز PY - 2011 VL - 4 IS - 1 SP - 95 EP - 107 JO - DIYALA JOURNAL OF ENGINEERING SCIENCES مجلة ديالى للعلوم الهندسية SN - 19998716 26166909 AB - ABSTRACT :- This study is conducted to investigate experimentally the punching shear and flexural strengths of reinforced concrete flat plate slabs made with Non-Rectangular (triangular and trapezoidal) shaped. Four test self-compacting concrete slab groups were manufactured, each of which consisted of three slab specimens identical in size and shape but different in constituent’s properties. All slabs are simply supported along the all edges and subjected to single point load applied at the center of gravity of each slab. Experimental results shows that the use of self compacting concrete improves the punching shear resistance and allows higher forces to be transferred through the slab-column connection. For slabs which were designed to fail in punching shear, the ultimate capacity of the tested specimens increased by (7%) to (20%) when the shape of slab specimens changed from triangular to trapezoidal. In contrast of slabs which were designed to fail in flexure, the ultimate capacity of the tested specimens increased from (16%) to (58%) when the shape of slab specimens changed from triangular to trapezoidal. The cracking load depends essentially on concrete strength and not on slab configuration, but, the ultimate capacity depends on both, concrete strength and shape of slab. Keywords:- Punching Shear, Flexural, Self compacted, Slabs, Concrete, Non-Rectangular

الخلاصة يتناول هذا البحث دراسة عملية لتقييم مقاومة القص الثاقب ومقاومة الانثناء للبلاطات الخرسانية ذاتية الرص ذات الشكل المثلثي والشكل شبة المنحرفة ،تم فحص اربعة مجاميع من البلاطات (اعتمادا على الشكل) كل مجموعة تضم ثلاثة بلاطات متشابهه في الشكل ومختلفة في التسليح و مقاومة انضغاط الخرسانة. اسندت البلاطات المفحوصة اسنادا بسيطا من جميع الاتجاهات وتم تسليط الاحمال بواسطة حمل مركز في مركز ثقل كل بلاطة. اظهرت الدراسة ان استخدام الخرسانة ذاتية الرص قد حسن من مقاومة البلاطات المفحوصة وسمح بانتقال احمال عالية من خلال المفصل الرابط بين البلاطة و العمود الخرساني. بالنسبة للبلاطات المصممة للفشل بالقص الثاقب، ازدادت مقاومة المقطع حوالي (7%) الى (20%) عندما تغير شكل البلاطة من الشكل المثلثي الى شبه المنحرف، بينما ازدادت مقاومة المقطع بمقدار (16%) الى (58%) عندما تغير شكل البلاطة من الشكل المثلثي الى شبه منحرف بالنسبة للبلاطات المصممة للفشل بالانثناء. اظهرت النتائج، كذلك، ان حمل التشقق يعتمد بصورة رئيسية على مقاومة الخرسانة المستخدمة ، بينما يعتمد الحمل الاقصى على مقاومة الخرسانة المستخدمة وشكل البلاطة. ER -