@Article{, title={Joining Cast Iron to Carbon Steel by Adhesive and Brazing}, author={Ahmed O. Jasim, Najem A. Al-Ameer Saaed,Fadhil A. Hashim}, journal={Journal of University of Babylon مجلة جامعة بابل}, volume={17}, number={2}, pages={763-775}, year={2009}, abstract={Abstract The large difference in physical and mechanical properties between cast iron and carbon steel, has led the designers to pay increased attention to achieve high integrity joint between them. Brazing and adhesive bonding are a true processes to obtain reliable joint. Many applications to join cast iron to carbon steel such as pulley to steel shaft, gear to steel shaft, impeller to steel shaft and so on. Most of these applications joints made by fastening of inserted keys between two components. In heavy load, Keyes subjected at high stresses concentration and failed in fatigue fracture early. Fasteners often do not develop the full strength of the base materials, particularly if one of base materials is brittle like gray cast iron. In this paper , brazing with ductile filler metal (Ag-base alloy) and epoxy adhesive are more reliability to join carbon steel / gray cast iron with high shear strength and more uniform stresses with less defects. A gray cast iron-to-low carbon steel cylindrical lap joint was studied: a steel rod brazed and adhesive inside cast iron tube using BAg-7 braze alloy and epoxy adhesive. The shear strength of joints of varying lengths was made.

الخلاصة نظراً للاختلاف الكبير في الخواص الفيزياويه والميكانيكية بين حديد الزهر والفولاذ الكاربوني, قاد المصممين للإعارة الانتباه المتزايد في تحقيق ربط متكامل بشكل كبيربينهما. يعتبر الربط بالمونة واللصق من عمليات الربط الحقيقية للحصول على ربط بتحمل عالي. تطبيقات متعددة لربط حديد الزهر مع الفولاذ مثل ربط بكر من حديد الزهر مع عمود دوران فولاذي , مسنن من حديد الزهر مع عمود دوران فولاذي, دفاعة من حديد الزهر مع عمود دوران فولاذي وتطبيقات أخرى. تتم اغلب تطبيقات الربط هذه بواسطة التثبيت والربط الميكانيكي وذلك بإدخال مفاتيح بين المركبتين. في الأحمال العالية تكون تلك المفاتيح تحت تركيز عالي للأجهادات وحصول فشل الكلال مبكراً. غالباً لا تعطي تلك المثبتات المقاومة الحقيقية للمواد المترابطة وخصوصا إذا كانت إحدى المادتين هشة مثل حديد الزهر الرمادي. في هذا البحث , الربط بالمونه باستخدام معدن حشو مطيلي (سبيكة –أساس فضة)واللصق باللأيبوكسي أعطى ربط ذو تحمل عالي بين حديد الزهر والفولاذ الكاربوني مع مقاومة قص عالية , اجهادات منتظمة, مع قلة العيوب. درس الربط التناكبي الأسطواني : بربط قضيب من الفولاذ بالمونة واللصق بداخل أنبوب من حديد الزهر وباستخدام سبيكة المونة(أساس فضة) واللصق باللأيبوكسي. تم قياس مقاومة القص للروابط بمختلف الأطوال.} }