TY - JOUR ID - TI - EXPERIMENTAL STUDY OF R.C. CORNER DETAILS دراسة عملية لتفاصيل الوصلات الخرسانية المسلحة AU - Dr. Jasim Mahmud Al-Khafaji أ.م.د. جاسم محمود الخفاجي AU - Dr. Zubaidah A. Al-Bayati د. زبيدة عبد اللطيف البياتي AU - Ali A. Khamis Al-Mallki علي عبد المحسن المالكي PY - 2011 VL - 4 IS - 1 SP - 516 EP - 531 JO - Al-Qadisiyah Journal for Engineering Sciences مجلة القادسية للعلوم الهندسية SN - 19984456 24117773 AB - This investigation presents an experimental study of strength and behaviour of various types of reinforcement details in concrete corner subjected to bending moment tended to open the angle. Ten specimens with various arrangements of reinforcement in the corner region are tested to study the effect of reinforcement detail, corner strength, cracks type, cracking moment, cracks pattern, corner deflection and corner efficiency. The specimens are designed to represent an actual prototype of a portal frame corner. The compressive strength of concrete in the test varies from (37.1) to (43.6) MPa, and steel tension ratio in legs is constant at ρ = 0.0081 in all test specimens. The nominal dimensions of the tested corners are (1077.8 mm) in overall length, (600 mm) in height and (150mm) in thickness, the nominal width, and the effective depth for all corner's leg section is held constant at (150 mm) and (129 mm) respectively. All corners are supported to be hinged in one leg by two hooks and rolled in other leg, also all corners are loaded by steel frame where, it produces moment tends to open the angle. Concrete strains at three different loading stages are recorded for each tested corner; also load deflection curves were plotted. Throughout the test operation crack patterns were drawn and the mode of failure of the tested corners is identified, which is divided into two types (flexural and bearing) failure. It was found that reinforcement detailing in corners subjected to moment tends to open the corner has important effect on the strength and the mode of failure of the corner. Depending on the results of the current experimental work some details are recommended to be used in the field work.

يستعرض البحث الحالي دراسة عملية لمقاومة وتصرف أنواع متعددة من تفاصيل التسليح للأركان الخرسانية المعرضة لعزوم إنحناء تعمل على فتح الزاوية. تم فحص (10) نماذج لتفاصيل تسليح مختلفة في منطقة الأركان لدراسة تأثير تفاصيل التسليح، مقاومة الخرسانة، نوع التشققات، عزوم التشققات، أشكال التشققات، هطول الركن الخرساني وكفاءته. صممت النماذج لكي تمثل وتحاكي أركان الهياكل الإنشائية. مقاومة إنضغاط الخرسانة في الفحوصات تراوحت بين (37,1 و 43,6) ميكاباسكال، نسبة حديد الشد في سيقان الأركان كانت ثابتة وتساوي(ρ = 0.0081) لكل النماذج المفحوصة. أبعاد الأركان التي تم فحصها هي (1077,8ملم للطول، 600ملم للإرتفاع و 150ملم للسمك). تم الحفاظ على العرض والعمق الفعال ثابتاً لسيقان كل الأركان وبما يساوي (150ملم و 129ملم) على التوالي. أسندت جميع الأركان على شكل مفصلي في أحد السيقان بإستخدام عقفتين وأسندت الجهة الأخرى بمفصل متحرك. تم تحميل جميع الأركان بواسطة هيكل فولاذي يقوم بتوليد عزم يعمل على فتح الزاوية. تم تسجيل الإنفعالات في الخرسانة لثلاثة مراحل تحميل مختلفة ولكل ركن تم فحصه كما وتم رسم منحيات الحمل والإزاحة. أثناء عملية الفحص تم رسم التشققات الحاصلة في الركن الخرساني وتحديد نوعية الفشل الحاصلة والتي كانت على نوعين (فشل إنحناء أو إرتكاز). لقد تبين بأن تفاصيل التسليح في الأركان الخرسانية المعرضة لعزوم انحناء تعمل على فتح الزاوية لها تأثير كبير على مقاومة ونوع الفشل الحاصل في الركن الخرساني. بالإعتماد على النتائج المستحصلة من البحث الحالي تم إختيار عدد من التفاصيل والتوصية بإعتمادها في المجال الحقلي. ER -