TY - JOUR ID - TI - Mechanical Properties For Pipes Made From Composite Materials (Glass/ Epoxy And Carbon/ Epoxy) Subjected To Internal Pressure الخواص المیكانیكیة لأنابیب مصنوعة من مواد مركبة (ألیاف الزجاج/ ایبوكسي+كاربون/ ایبوكسي) معرضة لضغط داخلي AU - Zainab K. Hantoosh AU - Hatam Kareem Kadhom AU - Aseel Jasim Mohammed PY - 2012 VL - 30 IS - 6 SP - 117 EP - 134 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - Composite Materials have been used extensively in application such as pipes and pressure vessels. Therefore it is important for further studies on the properties of these materials. This paper presents the results from a series of tensile tests on the mechanical properties of composite materials. Specimens cut from pipes made from composite materials were tested under internal pressure loadings have been tested by using a series of ASTM Standards test methods for mechanical properties. Based on the results obtained, the longitudinal E11,transverse E22 and shear modulus G12 of 101.2 GPa, 5.718 GPa, 4.346 GPa and 36.6, 5.4 GPa, 4.085 GPa for carbon and glass fiber/ epoxy composites, respectively, while the ultimate longitudinal XL, transverse XT and shear tensile τ0 strengths of 1475.4 MPa, 20 MPa, 36 MPa and 618.9 MPa, 14 MPa, 28 MPa for carbon and glass fiber/epoxy composites, respectively. The results from this series of tests have been presented and compared with results from analytical equations. Good agreement was achieved between the experimental results andanalytical results.

تم استخدام المواد المركبة على نطاق واسع في التطبيقات العملية ،و الصناعية مثل الأنابيب و أوعية الضغط لذلك فأّنه من الضروري ، اجراء المزيد من الدراسات على خواص هذه المواد. هذه الدراسة تقدم صورة واضحة للخواص الميكانيكية لهذه المواد المركبة مستندة على اختبارات الشد، حيث ان العينات قطعت من انابيب مصنوعة من مواد مركبة معرضة المتعلقة بالخواص ASTM الى ضغط داخلي وقد انجز العمل وفق اسس ومعايير المواصفة المستعرض و معامل E الطولي 22 E الميكانيكية ،ومن تلك الأختبارات حصلنا على نتائج 114.058GPa, 5.4GPa, 36.6GPa, وكانت للزجاج والكاربون على التوالي G القص 124.346 وهذه النتائج للمواد المركبة من الكاربون وألياف GPa, 5.718GPa, 101.2GPa وعلى التوالي بينما ، ( carbon and glass fiber/ epoxy composites) الزجاج هي τo واجهاد القص Xt والمستعرضة ، XL الأجهادات الطولية28 للمواد المركبة من الكاربون و MPa,14MPa,18MPa,36MPa,20MPA,1475.4ألياف الزجاج مع الايبوكسي على التوالي ، وكانت نتائج الاختبارات العملية عند مقارنتها مع المعادلات التحليلية متطابقة بشكل جيد ER -