TY - JOUR ID - TI - FINITE ELEMENT ANALYSIS OF THE INFLUENCE OF EDGE ROUNDNESS ON THE STRESSES AND CUTTING FORCES FOR CERAMIC CUTTING TOOLS استخدام طريقة العناصر المحددة لدراسة تأثير تقوس حافة القطع على اجهادات وقوى القطع لعدة القطع السيراميكية AU - Suha K. Shehab سهى كريم شهاب PY - 2009 VL - 2 IS - 1 SP - 1 EP - 12 JO - DIYALA JOURNAL OF ENGINEERING SCIENCES مجلة ديالى للعلوم الهندسية SN - 19998716 26166909 AB - This work summarizes the effect of edge round preparation for three types of ceramic cutting tool materials (Al2O3/ZrO2, Al2O3/ TiC, Si3N4/Y2O3) upon cutting forces and stress distribution on the cutting tool in orthogonal cutting as determined with Finite Element Method simulations.The results obtained from this study provide a fundamental understanding of the process mechanics for cutting with realistic cutting tool edges and may assist in the optimization of tool edge design. These results compare with other previously published papers and showed a good agreement.It is also proved, that for every cutting condition and tool material, there is an optimum geometry. The material of ceramic cutting tools proved, that it has been good in performance comparing with other previously published papers.

في هذا البحث تم التركيز على دراسة تأثير نصف قطر تقوس حافة الحد القاطع لثلاث مواد من عدد القطع السيراميكية على توزيع قوى القطع , كذلك على شكل وتوزيع الاجهادات على وجه العدة بأستخدام تقنية العناصر المحددة0 وقد تم الحصول على نتائج أعطت زيادة في إدراك عملية القطع كذلك أمكن تحديد الاختيار الأمثل لتصميم حافة العدة وأظهرت النتائج توافقا واضحا عند مقارنتها مع بحوث منشورة مسبقا في هذا المجال. كذلك تبين ان لكل ظرف قطع ولكل مادة من مواد عدد القطع يوجد تصميم امثل لعدة القطع المستخدمة ,كما تبين إن للمواد السيراميكية في تصميم عدد القطع لها الاداء الامثل في عملية القطع. ER -