@Article{, title={Modeling ofMixing in The Liquid Phase For Bubble Column نموذجية للخلط في للطورالسائل لعمود الفقاعي}, author={Ali H. Jawad}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={27}, number={10}, pages={1992-2007}, year={2009}, abstract={Hydrodynamic characteristics (mixing in the liquid phase) in a bubble column with a non-Newtonian liquid phase (aqueous solutions of carboxymethylcellulose, or CMC, at different concentrations) were measured and correlated. Experiments in a 0.2-m diameter, 2.4-m-high bubble column were carried out to determine degree of mixingin the liquid phase at various gas and liquid flow rates. The axial dispersion model was used in the two operating modes, batch and continuous, and the tanks-in-series model was used just in the case of continuous mode. The axial dispersion model with closed-closed boundary conditions fit experimental data quite well and thus was usedto estimate the axial dispersion coefficient. This parameter was higher in batch mode than in continuous mode, and its trend was to increase as superficial gas velocity increased.

الخصائص الهيدرودينامية (الاختلاط في المرحلة السائلة) في عمود الفقاعي للسوائل النيوتينة الغير القابلة بتراكيز مختلفة) ، تم قياسها وحسابها رياضيا.اما بالنسبة CMC او carboxymethylcellulose) لانضغاط لجانب العملي أجريت في 0.2 مترا وقطره و 2.4 مترا ارتفاع العمود/ فقاعة أجريت لتحديد درجة من الاختلاط في المرحلة السائلة في معدلات تدفق مختلفة من الغاز و السائل. ، (Continuous) ومستمرة (Batch) موديل التشتت الافقي المستخدم في تشغيل اثنين من وسائط ، دفعة استخدم نموذج فقط في حالة طريقة مستمرة. موديل التشتت الافقي مع تظام (Series) والخزان في سلسلة اغلاق-اغلاق في الظروف تناسب تماما مع البيانات التجريبية ، وبالتالي كان المستخدمة لتقدير معامل ، (Continuous) من طريقة في طريقة مستمرة (Batch) التشتت محوري. هذه القيم كانت أعلى في دفعة والاتجاه إلى زيادة سطحية كما زادت سرعة الغاز.} }