TY - JOUR ID - TI - Taguchi Approach to Optimize Pack Aluminization Parameters in Carbon Steel Using MINITAB13 استخدام طریقة تاكوجي لتحدید العوامل المثلى في عملیة الطلاء بالألمنة في الفولاذ الكاربوني بواسطة MINITAB 13 AU - Abbas Khammas Hussein PY - 2009 VL - 27 IS - 11 SP - 2259 EP - 2272 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - Pack aluminization has been rapidly developed and widely used in many fieldsdue to its superior properties of coating. Surface is the only part of the componentwhich has to coexist with external environment. Majority of engineering failuresoriginate from the surfaces and components degrade in service leading to failures suchas fatigue, wear, corrosion and oxidation. The present study deals with the surfacemodification of steel base through diffusion of aluminium by aluminium packcementation for improving wear and corrosion resistance. The material chosen forstudy is medium carbon steel. Effect of varying weight percentage (wt.%) of halideactivator (NH4Cl) at different diffusion temperatures and times on the microstructureand microhardness of aluminized specimens was studied. Taguchi robust designtechnique using MINITAB13 was used to rank several factors that may affect themicrohardness and microstructure in order to formulate the optimum conditions. TheTaguchi orthogonal array L9 (33) was used for experimental design with three level ofconsideration for each factor. The respone (Microhardness) was analyzed based on theTaguchi’s signal-to-noise ratio. The use of 4%wt. of (NH4Cl) at 5hr and diffusiontemperature of 700oC seems to be the optimum condition, where the surface hardnesscould be increased to 1000Hv when aluminized. X-Ray diffraction studies have beenconfirmed the presence of aluminides in the surface layer, which could be instrumentalin the significant increase in the surface hardness.

ان طريقة الطلاء بالألمنة قد تطورت بشكل سريع و استخدمت بصورة واسعة في العديد من المجالات نتيجة خواص الطلاء الفائقة. و يعتبر السطح الجزء الوحيد من المنتج الذي يتعرض بشكل مباشر الى الوسط الخارجي. ان أغلب حالات الفشل الهندسي تنشأ من السطح و تؤدي الى فشل الجزء الهندسي في التطبيق مثل الفشل بالكلال ، البلى، التآكل و الأكسدة. يتضمن هذا البحث، تحوير سطح الفولاذ من خلال انتشار الألمنيوم بواسطة التغليف بالسمنتة للألمنيوم و ذلك لتحسين مقاومةالبلى و التآكل. ان المادة التي تم اختيارها في هذه الدراسة هي الفولاذ المتوسط الكاربون. وقد تم في عند درجات (NH4Cl) هذا البحث دراسة تأثير النسب المئوية الوزنية المختلفة لهاليد المادة الفعالة حرارية و أوقات مختلفة على التركيب المجهري و الصلادة المجهرية للعينات الخاضعة لعمليةلتحديد العوامل التي يمكن أن MINITAB الألمنة. تم استخدام طريقة التصميم لتاكوجي بواسطة 13 تؤّثر على الصلادة المجهرية و التركيب المجهري و من ثم تحديد الظروف المثلى. مصفوفة تاكوجي قد تم اعتمادها في تصميم التجارب نظرا لاستخدام ثلاث مستويات لكل عامل تحت L9( من نوع ( 33 الدراسة. كما تم تحليل الاستجابة ( الصلادة المجهرية) من خلال الاعتماد على نسبة عند زمن مقداره 5 NH4Cl 4% من wt. الاشارة/الاستجابة لتاكوجي. أظهرت النتائج أن استخدام700 يؤدي الى الحصول على الحالة المثلى ضمن مجموعة oC ساعة و درجة حرارة مقدارها 1000Hv الظروف التي أُستخدمت في هذا البحث حيث أن الصلادة السطحسية يمكن أن تزداد الى عندما يخصع الفولاذ الى الألمنة. أظهرت دراسات حيود الأشعة السينية وجود مركبات في السطح و التي يمكن أن تلعب دورا فعالا في الزيادة الكبيرة في الصلادة السطحية. Aluminides ER -