TY - JOUR ID - TI - دراسة التأثير الحراري على الخواص الميكانيكية لمتراكب هجيني AU - رولا عبد الخضر عباس PY - 2007 VL - 10 IS - 1 SP - 11 EP - 23 JO - Al-Nahrain Journal of Science مجلة النهرين للعلوم SN - 26635453 26635461 AB - Elastic Modulus (E), Flexural Strength (F.S.), Shear Forces ( ), Impact Strength (I.S.), Surface Indentation, Thermal Conductivity (k) of Composite materials that Consist of Epoxy reinforced with (30%) ratio of Glass fiber and Kevlar fiber and Carbon fiber have been studied A comparison is made between the properties of Composite at different temperature (23, 40, 60, ±2)oC. Volume fraction for all specimens was (30%) and the reinforcement materials were continuous fibers oriented in Woven Roven It was found that elastic modulus for Epoxy increases when the material is reinforced with different type of fiber, where as it decreases when temperature increases. Flexural strength increases with Reinforcement and temperature rise; such as shear Forces ( ) increases with reinforcement and temperature rise. Impact strength and thermal conductivity increases with reinforcement and temperature rise. Surface Indentation for composite material decreases when temperature increases.

تم دراسة معامل يونك ( E) ومتانة الانحناء (F.S.) ومقاومة القص للطبقات الداخلية ( ) ومقـاومة الصدمة ( I.S. ) والصلادة السطحية ومعامل التوصيلية الحرارية (K ) لمـادة متراكبة هجينـة مكونة من مادة الايبوكسي المقواة هجيناً (ألياف الزجاج,ألياف الكربون , وألياف (الكربون+الكفلر) ) .ومن ثم تمت مقارنة خـواص هذه المواد عنـد درجـات حرارية مختلفة هي oC( 23, 40, 60 ± 2) .وقد كانت نسبـة الكسر ألحجمي المستخدمـة (30%) وأن مـواد التقوية المستخدمة هي عبارة عن ألياف محاكة بشكل حصيرة (Woven Roven). لقد وجد أن معامل المرونة ( E ) والصلادة السطحية تزداد في حالة التقوية و تقل عند زيادة درجة الحـرارة.أمـا متانـة الانحناء (F.S.) وقوة القص ( ) فقد وجد بأنها تزداد في حالة التقوية بالألياف على اختلاف أنوعها وتزداد أيضاً بزيـادة درجة الحرارة, أما مقاومة الكسر (I.S.) فأنها تزداد في حالة التقوية بالألياف ومع زيادة درجة الحرارة أيضاً. ER -