@Article{, title={Theoretical Determination of Forming Limit Diagram for Al 2024 T3 sheet when changing strain paths التعيين النظري لمخططات حد التشكيل لصفيحة من سبيكة الألمنيوم(Al 2024 T3)عند تغيير مسارات الانفعال}, author={Anas.O.Balod انس عبيد إدريس and Waleed J.Ali وليد جلال علي}, journal={AL-Rafidain Engineering Journal (AREJ) مجلة هندسة الرافدين}, volume={17}, number={2}, pages={86-94}, year={2009}, abstract={AbstractThe effect of changing strain paths on forming limit curve of aluminum alloy Al 2024T3 sheet has been studied by determining forming limit diagrams after prestraining theoretically . The method of calculating the shape of forming limit diagrams used Hosford yield criterion (high exponent) with the Marciniak and Kuczynski (M-K) analysis to include the effects of changing the strain path to several levels in (uniaxial, biaxial, and plane strain tension).In this work it was found that theoretical forming limit curve, calculated using the above analysis and yield function is closed to the experimental curve of complex strain path. Keywords : sheet metal forming, forming limit diagram(FLD), complex strain path

الخلاصةتمت دراسة تأثير تغيير مسارات الانفعال في منحني حد التشكيل لصفيحة من سبيكة الألمنيوم (Al 2024 T3) وذلك بتعيين مخططات حد التشكيل نظريا بعد تغيير مسار الانفعال . أن طريقة تعيين منحنيات حد التشكيل نظريا تتم باستخدام نظرية الخضوع (Hosford) وتحليل(M-K) لتتضمن تأثير تغيير مسارات الانفعال (مسار الشد أحادي المحور, مسار الشد ثنائي المحور, مسار الانفعال المستوي). في هذه الدراسة وجد بان منحني حد التشكيل النظري والمعيين باستخدام التحليل ونظرية الخضوع أعلاه قريب من المنحني المعين عمليا بإتباع مسارات انفعال معقد.} }