TY - JOUR ID - TI - CAVITATION IN CENTRIFUGAL PUMPS التكهف في المضخات الانتباذية AU - Mohammed Khudhair Abbas محمد خضير عباس PY - 2010 VL - Engineering Sc. Conference IS - First SP - 170 EP - 180 JO - DIYALA JOURNAL OF ENGINEERING SCIENCES مجلة ديالى للعلوم الهندسية SN - 19998716 26166909 AB - ABSTRACT:- Design, operation and refurbishment of centrifugal pumps are strongly related to cavitation flow phenomena, which may occur in either the rotating runner-impeller or the stationary parts of the centrifugal pumps. The numerical simulation (ANSYS CFX software Release 12) can be use to detect the cavitation in centrifugal pump. The total pressure at inflow boundary is reduced in small increment to meet the beginning cavitation. The CFD results computed by ANSYS CFX software can be shown that the formation bubble form in a lower pressure area which caused by high velocity fluid. Inception cavitation occurs on the blade surface where the leading edge meets the tip. For lower NPSH values the cavitation zones move from leading to trailing edge. The drop in the head-NPSH curve begins when the cavity length is reached the maximum chord length of the blade. The computational grid was generated by SFX-Turbogrid with H-Grid through the blade and flow passage.Keywords:- Centrifugal pump, CFD, ANSYS CFX software Release 12, Cavitation

الخلاصة ان تصميم وعمل وصيانة المضخات الانتباذية (الطاردة من المركز) مرتبط بشدة بظاهرة جريان الفجوات (التكهف) والتي تحصل في الاجزاء المتحركة اوالثابته للمضخات. تم اسخدام محاكاة عددية باستخدام برنامج الـ ANSYS لاكتشاف التكهف في المضخات الانتباذية. تم تقليل الضغط الكلي المتدفق بزيادات صغيرة لحين ظهور الفقاعات. النتائج المستحصلة CFD اظهرت ان تكوين الفقاعات يتشكل في المناطق ذات الضغط القليل بسبب سرعة المائع العالية . في البداية ، التكهف يحصل في نهاية الحافة الامامية لسطح الريشة ولقيم قليلة من NPSH مناطق التكهف تنتقل من الحافة الامامية الى الحافة الخلفية لسطح الريشة، الهبوط في مخطط الضغط - NPSH يبدأ عندما يصل طول الفقاعة يصل الى طول اكبر وتر للريشة الخاصة بالمضخةالانتباذية . ER -