@Article{, title={The Effect of Adding Nickel Element on Mechanical and Wear Properties of SiCp-Cu Composites تأثیر أضافة النیكل على الخصائص المیكانیكیة والبلى للمتراكب ( SiCp-Cu)}, author={Samir B. Younis}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={28}, number={21}, pages={6228-6236}, year={2010}, abstract={Reinforced composites are prepared from a Copper as a matrix with SiCpowder in different percentage ( i.e 5-25 vol.%) .For each prepared reinforcedcomposite with respect to SiC addition , they divided into two parts , one undergo toaddition of Ni in fixed percentage (2 wt%) and the other part leave without addition.After drying , mixing and milling process, disc samples were prepared . thesesamples were heat treated at (900°C) using furnace at argon atmosphere. Density,porosity, Vicker microhardness , compressive strength were performed. Dry slidingwear tests of Cu–SiCp composites were carried out using pin on disc apparatus with atypical experimental plan of simultaneous variation of loads (5,10)N . The resultsshow that the density was decreased while porosity increased with SiC content , andthis was less remarkable with nickel presence. Vicker microhardness, compressstrength were improved by the nickel wettability on the reinforcement. Moreoverdecreasing in wear rate comparing with the absence one. The nickel presence modifiesthe interface structural model and is effective in passing load between the matrix andthe reinforcement, by lessening the extent of interfacial debonding.

تم تحضیر المتراكب المكون من النحاس كمادة أساس ودقائق من كاربید السلیكون كمادة تدعیم بنس ب م زج25 % وزناّ) , حبث حضرت مجموعتین من النسب أعلاه , الاولى تم أضافة عنصر النیكل الیھا بنسبة - مختلفة ( 5ثابنة ( 2% وزناّ) , والاخرى بقت كما ھي. وبع د عملی ة النجفی ف والخل ط ت م ك بس النس ب المحض رة غل ى ش كل900° ) وفي جو من الاركون . تم فحص الكثاف ة والمس امیة والص لادة ومقاوم ة C) أقراص تم تلبیدھا عند درجة5,10 ) . م ن النت ائج N) الانضغاط للعینات المحضرة, اضافة الى فحص البلى , حیث تم اس تخدام أحم ال مختلف ةالمستحصلة , تبین ان الكثافة تقل بازدیاد النسب الوزنیة لكاربید السلیكون تقابلھا زیادة ف ي نس بة المس امیة . لك نھذا العامل كان أقل تأثیراّ في العینات التي تحتویعلى عنصر النیكل . اضافة الى ذلك ان تلك الاض افة ف د حس نتمن الخصائص المیكانیكیة للمتراكب من صلادة ومقاومة انضغاط . علاوة على ذلك ص غر مع دل البل ى مقارن ةمع العینات التي یختفي فیھا عنصر النبكل , حیث ان وجوده یؤدي الى توزیع الحمل الموضوع بین مادة الاساسومادة التدعیم وبالتالي تفادي الانفصال الحادث في السطح البیني} }