TY - JOUR ID - TI - MODELING THE SURFACE CHARACTERISTICS OF SHOT PEENED 2024 ALUMINUM ALLOY نمذجة المواصفات السطحية لسبيكة الالمنيوم 2024 المسفعة بالكرات AU - Hussain J.Mohamed.Al.allkawi حسين جاسم العلكاوي AU - Fatin N.Abdu Allah فاتن عبد الله AU - Mairb R.Abdul Hassan مارب عبد الحسين PY - 2011 VL - 11 IS - 2 SP - 293 EP - 302 JO - Iraqi journal of mechanical and material engineering المجلة العراقية للهندسة الميكانيكية وهندسة المواد SN - 20761819 AB - AbstractThe present research aims to study the effect of shot peening time (SPT) using metal balls (stainless steel balls) on surface roughness ,hardness and residual stresses .the above first two parameters (roughness, hardness) were measured before and after shot peening،While the third parameter i.e. the residual stresses werecalculated based on the original yield stress of the ALUMINUM ALLOY 2024. Theabove three parameters were empirically modeling using the curve fitting equationsThe following conclusions can be drawn from this work:1-Surface roughness increases with increasing the (SPT).2-The hardness increases with increasing SPT (For the current study an improvement of 36.75%) using shot peening of 2024-Al alloy.3-The compressive residual stresses increases with increasing SPT (for the present study an improvement of 11%using shot peening of 2024 –Al alloy.

ب فذقلا نمز ريثأت لاتايرك ةيندعملا ) ةعنصم تايركصلا ذلاوفلا نمدل(حطسلا ةنوشخ ىلع ، والصلادة، والاجهادات المتبقية.العامل الأول و الثانيأعلاه تم قياسها قبل و بعد عملية القذف، بينما العامل الثالث أي الاجهادات المتبقية حسبتاعتمادا على إجهاد الخضوع الأصلي لسبيكة الألمنيوم 2024 حيث تم نمذجة العوامل الثلاثةأعلاه بواسطة معادلات رياضية تعتمد على النتائج العملية المستخرجة. الأستنتاجات التالية:- ER -