TY - JOUR ID - TI - STUDY OF THE EFFECT OF ACETONE DILUTION PERCENTAGE ON MECHANICAL PROPERTIES OF EPOXY-ACETONE SYSTEM دراسة تأثير النسبة المئوية للألأسيتون على بعض الخواص الميكانيكية لمادة ايبوكسي - أسيتون AU - Laith Kais Abbas AL-Haidary ليث قيس عباس الحيدري PY - 2011 VL - 11 IS - 2 SP - 371 EP - 379 JO - Iraqi journal of mechanical and material engineering المجلة العراقية للهندسة الميكانيكية وهندسة المواد SN - 20761819 AB - Abstract:A series of epoxy-acetone blends have been prepared with different acetone percentages. After stiffening, the prepared epoxy samples are cured in 40°C for 24 hrs. Then a tensile test for the material specimens was performed by a universal computer aided testing machine.The measured tensile tests for the specimens reveal that as the acetone percentage is increased, the elastic properties are increased. Nevertheless, when the acetone percentage reaches a maximum value, the tensile properties decreases with further increase in acetone percentages.The results are explained in terms of that the acetone additions reduces thecross linking density and reduce the brittle character of the prepared epoxy. When theacetone content is more than (5%), the strength becomes to decrease due to severereduction of cross linking density

تم تحضير سلسلة من خلائط الايبوكسي - أسيتون مع نسب مختلفة من الاسيتون . وبعدالتصلب ، تمت المعالجة الحرارية بدرجة 40 درجة مؤية لمدة 24 ساعة . وبعدها تم اجراء اختبار الشدللعينات باستخدام جهاز فحص قياسي مدعوم بالحاسوب .وقد أظهرت اختبارات الشد المقاسة للعينات المحضرة انه كلما زادت النسبة المؤية للاسيتون زادتمعها خصائص المرونة للمادة . ولكن عندما يصل محتوى الاسيتون الى القيمة القصوى ، تتراجع خصائصالمرونة للعينات عند الاستمرار في زيادة النسبة المؤية للاسيتون .ةشاشهلا ةفص نم وقد تم تفسير النتائج على اساس ان اضافة الاسيتون يقلل من كثافة التشابك فيقلللعينات الايبوكسي المحضرة . فعندما تتجاوز نسبة الاسيتون( 5%) تبدأ مقاومة العينات بالانحدار بسببالاختزال الكبير في كثافة التشابك . ER -