@Article{, title={Static Performance Characteristics of Vortex Rate Sensor}, author={Ali Abdul AL-Muhsen AL-Asady and Wisam Gasim Kadhum}, journal={Journal of Engineering مجلة الهندسة}, volume={18}, number={7}, pages={829-836}, year={2012}, abstract={The vortex rate sensor is a fluidic gyroscope with no moving parts and can be used in very difficult conditions like radiation, high temperature and noise with minimum cost of manufacturing and maintenance. A vortex rate sensor made of wood has been designed and manufactured to study theoretically and experimentally its static performance. A rig has been built to carry out the study, the test carried out with three different air flow rates (100, 150, and 200 l/min).The results show that the relation between the differential pressure taken from the sensor pickoff points and the angular velocity of the sensor was linear.The present work involved theoretical and experimental study of vortex rate sensor static characteristics. Vortex rate sensor has been designed and manufactured with dimensions:-Radius of vortex chamber =140 mm, Radius of sink tube rs =4.5 mm, the pickoff hole diameter = 2mm, Height of vortex chamber b =19 mm, Height of pickoff pipe h =25 mm.

متحسس معدل التدويم هو جايروسكوب مائعي بدون اجزاء متحركة ويمكن استخدامه بظروف صعبة جدا كالاشعاع ودرجات الحرارة العالية والضوضاء وبأقل كلفة تصنيع وصيانة. متحسس معدل التدويم مصنوع من ماده الخشب تم تصميمه وتصنيعه واستخدامه لوضع دراسة نظريه وعمليه للأداء الاستاتيكي للجهاز. كذلك تم بناء منظومة خاصة لإجراء الدراسة, في هذه الدراسة تم تسليط ثلاثة قيَم مختلفة لمعدل تدفق الهواء وهي (100,150 و 200 لتردقيقه) ووجد من خلال هذه الدراسة ان العلاقة ما بين فرق الضغط المأخوذ من الجهاز والسرعة الزاوية للجهاز هي علاقة خطيه.يتضمن هذا البحث دراسه نظريه وعمليه للخواص الاستاتيكيه للمتحسس . حيث تم تصميم وتصنيع المتحسس بالابعاد التاليه:نصف قطر حجرة الدوامه(R)=140 ملم , نصف قطر مجرى الخروج (rs)=4,5 ملم,قطر فتحه الpickoff=2ملم, ارتفاع حجرة الدوامه (b)=19ملم, ارتفاع انبوبh) pickoff ) =25 ملم.} }